Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Gefen GTB-HDBT-POL-BLK
Summary of Contents for Gefen GTB-HDBT-POL-BLK
- Page 1 60Hz, 4:2:0 Extender w/ POL and 2-way IR GTB-HDBT-POL-BLK User Manual...
-
Page 2: Important Safety Instructions
Important Safety Instructions Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this product near water. Clean only with a dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. -
Page 3: Warranty Information
Gefen warrants the equipment it manufactures to be free from defects in material and workmanship. If equipment fails because of such defects and Gefen is notified within two (2) years from the date of shipment, Gefen will, at its option, repair or replace the equipment, provided that the equipment has not been subjected to mechanical, electrical, or other abuse or modifications. -
Page 4: Operating Notes
It will not work with Gefen IR extenders. • The IR Ext port, on the Receiver unit, is designed to work with the Gefen EXT-RMT-EXTIRN extender. It will not work with the electrical IR connection from an... -
Page 5: Features And Packing List
Audio™ ► 3DTV pass-through ► CEC pass-through ► Lip Sync pass-through • Bi-Directional IR extension • Gefen POL feature provides power to the Receiver unit over the CAT-5e • Uses HDBaseT™ technology • Locking power connector • Easy surface mounting... -
Page 6: Packing List
The following items are shipped with the 4K Ultra HD Extender w/ POL and 2-way IR. If any of these items are not present in the box when you first open it, immediately contact your dealer or Gefen. • 1 x 4K Ultra HD Extender w/ POL and 2-way IR (Sender unit) •... -
Page 7: Getting Started
60Hz, 4:2:0 Extender w/ POL and 2-way IR Getting Started... -
Page 8: Sender Unit
Introduction Page Title Sender unit IR Out Link IR Out Link IR Out Link... - Page 9 Connect a mini-mono 3.5mm cable from this port to an automation system with an electrical IR output. It will not work with Gefen IR extenders. IR Out Connect the included IR emitter from this port to the IR sensor of the device to be controlled.
-
Page 10: Receiver Unit
Introduction Page Title Receiver unit IR Out Link IR Out Link IR Out Link... - Page 11 It will not work with the electrical IR connection from an automation control device. IR Out Connect an IR emitter (Gefen part no. EXT- IREMIT) from this port to the IR sensor of the device to be controlled. Link...
-
Page 12: Installation
Connect the included 24V DC power supply to the Sender unit and plug the AC power cord into an available electrical outlet. Power to the Receiver unit is delivered from the Sender unit over the CAT-5e/CAT-6 cable using Gefen POL technology. -
Page 13: Sample Wiring Diagram
CAT-5e (or better) CABLE (Up To 230 FT) HDMI CABLE Automation System IR Emitter IR Input Ultra HD Source Receiver Sender Extender IR Emitter Ultra HD Display GTB-HDBT-POL-BLK Information The wiring diagram, shown above, requires an additional IR emitter (Gefen part no. EXT-IREMIT). -
Page 14: Basic Operation
60Hz, 4:2:0 Extender w/ POL and 2-way IR Basic Operation... -
Page 15: Power Led Status
Power LED Status The Power LED indicator on the Sender and Receiver unit provides basic information on the current status of the Extender for HDMI w/ POL. Status Description Power Solid blue • Power connected to Sender unit. • No power supplied to the Sender or Receiver unit. -
Page 16: Controlling The Source From The Viewing Location
Page Title Controlling the Source from the Viewing Location Important The IR Ext port, on the Receiver unit, is designed to work with the Gefen EXT-RMT-EXTIRN extender. It will not work with the electrical IR connection from an automation control device. -
Page 17: Controlling The Display From The Source Location
Important The IR In port, on the Sender unit, is designed to accept an electrical IR connection from third-party automation devices. It will not work with Gefen IR extenders. Connect the 3.5mm connector from the IR In port on the Sender unit to an automation system with electrical IR output. - Page 18 60Hz, 4:2:0 Extender w/ POL and 2-way IR Appendix...
-
Page 19: Surface Mounting Instructions
Surface Mounting Instructions The Sender and Receiver units can be mounted on any flat surface, as shown below (screws not included). There should be an inch or two of clearance between the edges of the unit and any walls or vertical surfaces to allow for enough clearance for connection and disconnection of the HDMI cables. -
Page 20: Network Cable Diagram
Network Cable Diagram Front of RJ-45 Connector 1 2 3 4 5 6 7 8 Gefen recommends the TIA/EIA-568-B wiring option. Use the following table when terminating cables in the field. Color Description Orange / White TD+ (Transmit Data, positive differential signal) -
Page 21: Specifications
Specifications Supported Formats Video • 4K x 2K (Ultra HD) • 1080p Full HD Audio • 7.1 Linear PCM • Dolby® TrueHD • DTS-HD Master Audio™ Connectors, Indicators, and Controls HDMI (Sender) • 1 x HDMI Type A, 19-pin, female HDMI (Receiver) •... - Page 22 *Preferred Stretch it. Switch it. Split it. Gefen’s got it. ®...
Need help?
Do you have a question about the GTB-HDBT-POL-BLK and is the answer not in the manual?
Questions and answers