Table of Contents
Advertisement
On the bottom of the Extender for HDMI 1.3 with Ethernet Receiver unit there are
four (4) DIP switches.
The DIP switches allow advanced EDID management of the Extender for HDMI
1.3 with Ethernet which may be necessary when troubleshooting or using
different brands of hardware. The DIP switches allow control over the EDID and
the HPD (Hot Plug Detect) status.
DIP SWITCHES
DIP Switch Location
Rece
eiver Unit (bottom)
Default settings for DIP switches
DIP Switch
1
2
3
4
Position
ON
OFF
OFF
NOT USED
9
Advertisement
Table of Contents
