Sender Unit Descriptions - Gefen EXT-HDMI 1.3-CAT5-ELR User Manual

1 5V DC
Connect the included 5V DC locking power supply to this connector. Only use
the power supply shipped with this unit.
2 Power
This LED will glow bright red once the included 5V DC locking power supply
has been properly connected to the unit and the locking power supply has been
connected to an available wall outlet.
3 HDMI In
Connect an HDMI cable from this port to the Hi-Def source.
4 Link
Connects the Sender unit to the Receiver unit using CAT-5 cabling.
5 Ethernet
Connects the Sender to the network using Ethernet cabling.
6 IR Blaster
Connect an IR Blaster cable (Gefen part # EXT-2IREMIT) from this port to the
Hi-Def source to control the source from the viewing location.

SENDER UNIT DESCRIPTIONS

5