Camera Tampering Detection
This section explains how to set up camera temper detection. With tamper detection, the
spray paint.
Please follow the steps below to set up the camera tamper detection function:
Enable camera tampering detection.
2. Enter the tamper trigger duration. (10 sec. ~ 10 min.) The tamper alarm will be triggered only when the
tampering factor (the difference between current frame and pre-saved background) exceeds the trigger
Server Settings (how to send alarm message) / Media Settings (send what type of alarm
message). Please refer to page 7 1 for detailed information.
redirection,
blocking or defocusing, or even
Application page > Event Settings /
VIVOTEK
User's Manual - 65