Network 33 - Vivotek FD8133V User Manual

VIVOTEK
Network
This section explains how to configure a wired network connection for the Network Camera.
Network Type
LAN
Select this option when the Network Camera is deployed on a local area network (LAN) and is intended
to be accessed by local computers. The default setting for the Network Type is LAN. Remember to click
Save when you complete the Network setting.
Get IP address automatically : Select this option to obtain an available dynamic IP address assigned by
Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera.
1. You can make use of VIVOTEK Installation Wizard 2 on the software CD to easily set up the Network
: This is used to determine if the destination is in the same subnet. The default value is
"255.255.255.0".
: This is the gateway used to forward frames to destinations in a different subnet. Invalid
User's Manual - 33