Vivotek FD8133V User Manual page 61

D a y / N ight Settings ( F D 8 134V only )
Switch to B / W in night mode
Select this to enab l e the Network Camera to automatically switch to B / W during night mode
IR cut filter
With a removable IR-cut filter, this Network Camera can automatically remove the filter to let IR light into
■ Auto mode
The Network Camera automatically removes the filter by judging the level of ambient light.
■ Day mode
In day mode, the Network Camera switches on the IR cut filter at all times to block infrared light from
■ Night mode
In night mode, the Network Camera switches off the IR cut filter at all times for the sensor to accept
■ Synchronize with digital input
The Network Camera automatically removes the IR cut filter when DI triggers.
■ Schedule mode
The Network Camera switches between day mode and night mode based on a specified schedule.
Enter the start and end time for day mode. Note that the time format is [hh:mm] and is expressed in
24-hour clock time. By default, the start and end time of day mode are set to 07:00 and 18:00.
VIVOTEK
User's Manual - 61