Vivotek FD8133V User Manual page 50

VIVOTEK
■ Refresh: Click this button to refresh all current connections.
■ Add to deny list: You can select entries from the Connection Status list and add them to the Deny List
and will automatically try to re-link again (IE Explore or Quick Time Player). If you want to enable the
■ Disconnect: If you want to break off the current connections, please select them and click this
automatically try to re-link again (IE Explore or Quick Time Player).
Enable access list filtering: Check this item and click Save if you want to enable the access list filtering
Filter Type
Select Allow or Deny as the filter type. If you choose Allow Type, only those clients whose IP addresses
are on the Access List below can access the Network Camera, and the others cannot access. On the
contrary, if you choose Deny Type, those clients whose IP addresses are on the Access List below will
not be allowed to access the Network Camera, and the others can access.
Filter
Then you can add a rule to the following Access List. Please note that the IPv6 access list column will not
be displayed unless you enable IPv6 on the Network page. For more information about IPv6 Settings,
please refer to page 37 for detailed information.
There are three types of rules:
: This rule allows the user to add an IP address to the Allowed/Denied list.
For example:
50 - User's Manual
Enable access list filtering Save in the first column.