Vivotek FD8133V User Manual page 106

VIVOTEK
daylight_enable
daylight_dstactualm
ode
daylight_auto_begin
time
daylight_auto_endti
me
daylight_manual_off
set
daylight_manual_be
gintime
daylight_manual_en
dtime
daylight_timezones
updateinterval
restore
reset
restoreexceptnet
restoreexceptdst
106 - User's Manual
<boolean> 6/6
<boolean> 6/7
string[19] 6/7
string[19] 6/7
<integer> 6/6
string[19] 6/6
string[19] 6/6
string 6/6
0, 6/6
3600,
86400,
604800,
2592000
0, 7/6
<positive integer>
0, 7/6
<positive integer>
<Any value> 7/6
<Any value> 7/6
480: GMT 12:00 Aucklan, Wellington, Fiji,
Kamchatka, Marshall Is.
520: GMT 13:00 Nuku'Alofa
Enable automatic daylight saving time in time
zone.
Check if current time is under daylight saving
time.
(Used internally)
Display the current daylight saving start time.
(product dependent)
Display the current daylight saving end time.
(product dependent)
Manually set daylight saving time with offset.
Manually set daylight saving time beginning.
Manually set daylight saving time end.
List time zone index which support daylight
saving time.
0 to Disable automatic time adjustment,
otherwise, it indicates the seconds between NTP
automatic update intervals.
Restore the system parameters to default
values after <value> seconds.
Restart the server after <value> seconds if
<value> is non-negative.
Restore the system parameters to default
values except (ipaddress, subnet, router, dns1,
dns2, pppoe).
This command can cooperate with other
"restoreexceptXYZ" commands. When
cooperating with others, the system parameters
will be restored to the default value except for a
union of the combined results.
Restore the system parameters to default
values except all daylight saving time settings.