Vivotek FD8133V User Manual page 54

VIVOTEK
W h ite b a lance : Adjust the value for the best color temperature.
■ Auto
■ Keep current value
2. Place a sheet of white paper in front of the lens, then allow the Network Camera to adjust the color
temperature automatically.
3. Select Keep Current Value to confirm the setting while the white balance is being measured.
Save to enable the new setting.
Image Adjustment
■ Brightness: Adjust the image brightness level, which ranges from -5 to +5.
■ Saturation: Adjust the image saturation level, which ranges from -5 to +5.
■ Contrast: Adjust the image contrast level, which ranges from -5 to +5.
■ Sharpness:
You can click Preview to fine-tune the image, or click Restore to recall the original settings without
incorporating the changes. When completed with the settings on this page, click Save to enable the
setting and click Close to exit the page.
Privacy Mask to open the settings page. On this page, you can block out sensitive zones to
address privacy concerns.
2011/01/01 13:44:17
■ To set the privacy mask windows, follow the steps below:
New to add a new window.
2. Use the mouse to size and drag-drop the window, which is recommended to be at least twice the size
of the object (height and width) you want to cover.
3. Enter a Window Name and click Save to enable the setting.
4. Select Enable privacy mask to enable this function.
54 - User's Manual
Auto and works well in most situations.
Auto and click Save.
2011/01/01 13:44:17