Vivotek FD8133V User Manual page 121

7.17 UPnP Port Forwarding
Group: upnpportforwarding
NAME VALUE
enable <boolean>
upnpnatstatus 0~3
7.18 System Log
Group: syslog
NAME VALUE
enableremotelog <boolean>
serverip <IP address>
serverport 514, 1025~65535
level 0~7
7.19 SNMP
Group: snmp (capability.snmp) (product dependent)
NAME VALUE
v2 0~1
v3 0~1
secnamerw string[31]
secnamero string[31]
authpwrw string[8~128]
authpwro string[8~128]
SECURITY DESCRIPTION
(get/set)
6/6 Enable or disable the UPnP port forwarding service.
6/7 The status of UPnP port forwarding, used internally.
0 = OK, 1 = FAIL, 2 = no IGD router, 3 = no need for
port forwarding
SECURITY DESCRIPTION
(get/set)
6/6 Enable remote log.
6/6 Log server IP address.
6/6 Server port used for log.
6/6 Levels used to distinguish the importance of the
information:
0: LOG_EMERG
1: LOG_ALERT
2: LOG_CRIT
3: LOG_ERR
4: LOG_WARNING
5: LOG_NOTICE
6: LOG_INFO
7: LOG_DEBUG
SECURITY DESCRIPTION
(get/set)
6/6 SNMP v2 enabled. 0 for disable, 1 for enable
6/6 SNMP v3 enabled. 0 for disable, 1 for enable
6/6 Read/write security name
6/6 Read only security name
6/6 Read/write authentication password
6/6 Read only authentication password
VIVOTEK
User's Manual - 121