Event Setting - Vivotek FD8133V User Manual

VIVOTEK

7.25 Event Setting

Group: event_i<0~2>
PARAMETER VALUE
name string[40]
enable 0, 1
priority 0, 1, 2
delay 1~999
trigger boot,
di,
motion,
seq,
recnotify,
tampering,
triggerstatus String[40]
di <integer>
mdwin <integer>
mdwin0 <integer>
inter 1~999
128 - User's Manual
SECURITY DESCRIPTION
(get/set)
6/6 Identification of this entry.
6/6 Enable or disable this event.
6/6 Indicate the priority of this event:
"0" = low priority
"1" = normal priority
"2" = high priority
6/6 Delay in seconds before detecting the next event.
6/6 Indicate the trigger condition:
"boot" = System boot
"di"= Digital input
"motion" = Video motion detection
"seq" = Periodic condition
"recnotify" = Recording notification.
"tampering" = Tamper detection.
6/6 The status for event trigger
6/6 Indicate the source id of di trigger.
This field is required when trigger condition is "di".
One bit represents one digital input. The LSB indicates DI 0.
6/6 Indicate the source window id of motion detection.
This field is required when trigger condition is "md".
One bit represents one window.
The LSB indicates the 1
For example, to detect the 1
6/6 Similar to mdwin. The parameter takes effect when profile 1 of
motion detection is enabled.
6/6 Interval of snapshots in minutes.
This field is used when trigger condition is "seq".
st
window.
st rd
and 3 windows, set mdwin as 5.