Vivotek FD8133V User Manual page 126

VIVOTEK
protocol_maxmegaco
nnection
protocol_rtp_multicast
_scalable
protocol_rtp_multicast
_backchannel
protocol_rtp_tcp
protocol_rtp_http
protocol_spush_mjpe
g
protocol_snmp
protocol_ipv6
videoin_type
videoin_resolution
videoin_maxframerate
videoin_codec
transmission_mode
network_wire
network_wireless
wireless_s802dot11b
wireless_s802dot11g
wireless_beginchannel
126 - User's Manual
<positive integer> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
0, 1, 2 0/7
<a list of available 0/7
resolution separated
by commas>
<a list of available 0/7
maximum frame rate
separated by
commas>
<a list of available 0/7
codec types
separated by
commas>
Tx, 0/7
Rx,
Both
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
<boolean> 0/7
1 ~ 14 0/7
The maximum megapixel streaming
connections.
Indicate whether to support scalable
multicast.
Indicate whether to support backchannel
multicast.
Indicate whether to support RTP over TCP.
Indicate whether to support RTP over HTTP.
Indicate whether to support server push
MJPEG.
Indicate whether to support SNMP.
Indicate whether to support IPv6.
0 => Interlaced CCD
1 => Progressive CCD
2 => CMOS
Available resolutions list.
Available maximum frame list.
Available codec list.
Indicate transmission mode of the machine:
TX = server, Rx = receiver box, Both = DVR.
Indicate whether to support Ethernet.
Indicate whether to support wireless.
Indicate whether to support wireless
802.11b+.
Indicate whether to support wireless
802.11g.
Indicate the begin channel of wireless