Install The Extension Brackets - Mercury KOB 810e FST User Manual

Mainboard User's Manual

Install the Extension Brackets

The extension brackets are used to connect features on the
mainboard to external connectors that can be attached to the system
chassis. Follow the steps below to install the extension brackets.
Note: All the ribbon cables used on the extension brackets have a
red stripe on the Pin-1 side of the cable.
Audio Ports and Game/MIDI Port Extension Bracket
This bracket provides three audio jacks for stereo line in, stereo
line out and microphone. In addition it has a 15-pin D-connector
which can be used by either a joystick or a MIDI device.
1. On the mainboard, locate the SOUND1 audio header for this
bracket.
2. Plug the cable from the bracket into the audio header.
3. In the system chassis, remove a blanking plate from one of the
expansion slots and install the extension bracket in the slot.
Use the screw that held the blanking plate in place to secure
the extension bracket.
14
1
SOUND1-
Audio Header
Audio Ports & Game/MIDI
Extension Bracket
Stereo Line-in
Microphone
Stereo Line-out
Game/MIDI