Utility Folder Installation Notes - Mercury KOB 810e FST User Manual

Mainboard User's Manual
KOB 810e FST Folder
You can use the software in the following sub-folders:
AUDIO: Drivers and software for the onboard audio
codec (a readme file points you to the correct directory
for installing the files)
IDE: Enhanced IDE drivers (a readme file points you to
the correct directory for installing the files)
INST: Upgrades and patches for the mainboard chipset
(a readme file points you to the correct directory for
installing the files)
VGA: Drivers and software for the onboard VGA (a
readme file points you to the correct directory for
installing the files)
Note: Some folders are subdivided into different operating
systems such as DOS, Windows 95, and Windows NT. Always
make sure that you are installing the correct software for the
operating system on your computer. Some folders are also
subdivided into different language versions, such as English,
French, and German.
Before installing any software, always inspect the folder for
files named README.TXT, INSTALL.TXT, or something
similar. These files may contain important information that is
not included in this manual.

Utility Folder Installation Notes

AMI Flash Memory Utility
This utility lets you erase the system BIOS stored on a Flash
Memory chip on the mainboard, and lets you copy an updated
BIOS to the chip. Take care how you use this program. If you erase
the current BIOS and fail to write a new BIOS, or write a new
BIOS that is incorrect, your system will malfunction.
For this mainboard, you must use the AMI818.EXE utility (where
xx is the version number). To use the utility, you must be in real-
38