Standard Cmos Setup Page - Mercury KOB 810e FST User Manual

Standard CMOS Setup Page

Use this page to set basic information such as the date and time, the
IDE devices, and the diskette drives. If you press the F3 key, the
system will automatically detect and configure the hard disks on
the IDE channels.
AMIBIOS SETUP – STANDARD CMOS SETUP
©1998 American Megatrends, Inc. All Rights Reserved
Date (mm/dd/yy) : Tue Jan 16, 2001
Time (hh/mm/ss) : 14:26:53
Type Size Cyln Head WPcom Sec Mode Mode Mode Mode
Pri Master : Auto
Pri Slave : Auto
Sec Master : Auto
Sec Slave : Auto
Floppy Drive A : 1.44MB 3 1/2"
PCI2
Floppy Drive B : Not Installed
Month : Jan – Dec
Day : 01 – 31
Year : 1901 – 2099
Date & Time
Use these items to set the system date and time
Pri Master
Use these items to configure devices connected
Pri Slave to the Primary and Secondary IDE channels. To
configure an IDE hard disk drive, choose Auto. If
Sec Master
the Auto setting fails to find a hard disk drive, set
Sec Slave
it to User, and then fill in the hard disk
characteristics (Size, Cyls, etc.) manually. If you
have a CD-ROM drive, select the setting
CDROM. If you have an ATAPI device with
removable media (e.g. a ZIP drive or an LS-120)
select Floptical.
Floppy Drive A Use these items to set the size and capacity of
Floppy Drive B the floppy diskette drive(s) installed in the
system.
3: BIOS Setup Utility
LBA Blk PIO 32Bit
On
On
On
On
ESC : Exit
↑↓ : Select Item
PU/PD/+/- : Modify
(Shift)F2 : Color
F3 : Detect All HDD
25