Internal Sound Connections - Mercury KOB 810e FST User Manual

If you want to install more IDE devices, you can purchase a second
IDE cable and connect one or two devices to the Secondary IDE
channel connector IDE2 on the mainboard. If you have two
devices on the cable, one must be Master and one must be Slave.

Internal Sound Connections

If you have installed a CD-ROM drive or DVD-ROM drive, you
can connect the drive audio cable to the onboard sound system.
On the mainboard, locate the two 4-pin connectors CD1 and CD2.
There are two kinds of connector because different brands of CD-
ROM drive have different kinds of audio cable connectors.
Connect the cable to the appropriate connector.
1
AUX1
1 L
2 GND
3 GND
4 R
Aux-In Connection
If you have installed a secondary CD-ROM drive or DVD-ROM
drive, you can connect the drive audio cable to the onboard sound
system.
On the mainboard, locate the 4-pin Aux-In header AUX1. Connect
the cable to the connector.
2: Mainboard Installation
CD1
CD2
19