Install A Cpu - Mercury KOB 810e FST User Manual

2: Mainboard Installation

Install A CPU

This mainboard has a Socket 370 which supports PPGA/FCPGA
Celeron and FCPGA Pentium III processors.
To ensure reliability, ensure that your processor has a
heatsink/cooling fan assembly.
Do not try to install a Socket 7 processor in the Socket-370. A
Socket 7 processor such as the Pentium-MMX, or the AMD K5/K6
does not fit in the Socket 370.
The following list notes the processors that are currently supported
by this mainboard.
PPGA/FCPGA Celeron: 300~700 MHz, FSB: 66 MHz
FCPGA Pentium III: 500~1130MHz, FSB: 100MHz, 133MHz
Installing a Socket-370 Processor
A processor installs into the ZIF (Zero Insertion Force) Socket-370
on the mainboard.
1. Locate the Socket-370 and CPUFAN1. Pull the locking lever
out slightly from the socket and raise it to the upright position.
CPUFAN1
Socket-370
Pin-1 Corner
2. On the processor, identify the Pin-1 corner by its beveled edge.
9