Chapter 2; Mainboard Installation - Mercury KOB 810e FST User Manual

Chapter 2

Mainboard Installation

To install this mainboard in a system, follow the procedures in this
chapter:
Identify the mainboard components
Install a CPU
Install one or more system memory modules
Verify that any jumpers or switches are set correctly
Install the mainboard in a system chassis (case)
Connect any extension brackets or cables to the mainboard
connector headers
Install any other devices and make the appropriate connections
to the mainboard connector headers.
Note:
1. Before installing this mainboard, make sure jumper JP1 is set
to Normal, the default setting. See this chapter for information
on locating JP1 and the setting options.
2. Never connect power to the system during installation. Doing
so may damage the mainboard.
2: Mainboard Installation
7