How To Set Up Your Computer's Ip Address For A Direct Connection - Z-World Wolf BL2600 User Manual

5.2.2 How to Set Up your Computer's IP Address for a Direct Connection

When your computer is connected directly to the BL2600 via an Ethernet connection, you
need to assign an IP address to your computer. To assign the PC the address
with the subnetmask
10.10.6.101
Click on
Start > Settings > Control Panel
double-click the Network icon. Depending on which version of Windows you are using,
look for the TCP/IP Protocol
Double-click on this line or select
to bring up the TCP/IP properties dialog box. You can edit the IP address and the subnet
mask directly. (Disable "obtain an IP address automatically".) You may want to write
down the existing values in case you have to restore them later. It is not necessary to edit
the gateway address since the gateway is not used with direct connect.
IP 10.10.6.101
Netmask
255.255.255.0
66
255.255.255.0
to bring up the Control Panel, and then
/ Network > Dial-Up Connections
Properties or
User's PC
Ethernet
crossover
cable
Direct Connection PC to BL2600
, do the following.
/ Network
Local Area Connections > Properties
BL2600
Board
line or tab.
Wolf (BL2600)