Z-World Wolf BL2600 User Manual page 75

Table A-1 lists the electrical, mechanical, and environmental specifications for the BL2600.
Feature
Microprocessor
Ethernet Port
Flash Memory
Program Execution SRAM
Data SRAM
Backup Battery
Configurable I/O
Digital Inputs
High-Current Digital Outputs
Analog Inputs
Analog Outputs
Serial Ports
Serial Rate
Connectors
User's Manual
Table A-1. BL2600 Specifications
BL2600
®
Rabbit 3000 at 44.2 MHz
10/100Base-T, 3 LEDs
256K
Panasonic CR2477 or equivalent 3 V lithium coin type,
950 mA·h standard, socket-mounted
16 individually software-configurable I/O channels may be configured
as digital inputs ± 36 V DC, switching threshold 1.5 V typical,
or as sinking digital outputs up to 40 V, 200 mA each
8 inputs hardware-configurable pull-up or pull-down,
± 36 V DC, switching threshold 1.4 V typical
4 outputs individually software-configurable as sinking or sourcing,
+40 V DC, 2 A max. per channel
Eight 11-bit res. channels, software-selectable ranges
unipolar: 1, 2, 2.5, 5, 10, 20 V DC; bipolar ± 1, ±2, ±5, ±10 V DC:
4 channels can be hardware-configured for 4–20 mA;
1 MΩ input impedance, up to 4,100 samples/s
buffered, 0–10 V DC, ±10 VDC, and 4–20 mA,
5 serial ports:
•
one RS-485 or one RS-232
•
two RS-232 or one RS-232 (with CTS/RTS)
•
one clocked serial port multiplexed to two RS-422 SPI master ports
•
one serial port dedicated for programming/debug
Max. asynchronous rate = CLK/8,
Max. synchronous rate = CLK/2
one Ethernet and two RabbitNet™
two polarized 9-position terminals with 0.1" pitch
three 4-position power terminals with 0.156" pitch
two 20-position terminals with 0.1" pitch (2 × 20 IDC option)
one 13-position terminal with 0.1" pitch (2 × 13 IDC option)
one 10-position terminal with 0.1" pitch (2 × 7 IDC option)
2 × 5 IDC, 1.27 mm pitch (BL2600),
2 × 5 IDC, 2 mm pitch (BL2610)
Rabbit 3000
512K (standard)
*
512K
Four 12-bit res. channels,
update rate 12 kHz
RJ-45 connectors:
Friction-lock connectors:
Programming port:
BL2610
®
at 29.4 MHz
None
—
71