Installing Dynamic C - Z-World Wolf BL2600 User Manual

2.3 Installing Dynamic C

If you have not yet installed Dynamic C version 8.51 (or a later version), do so now by
inserting the Dynamic C CD from the BL2600 Tool Kit in your PC's CD-ROM drive. The
CD will auto-install unless you have disabled auto-install on your PC.
If the CD does not auto-install, click
browse for the Dynamic C
installation once you have selected the
The online documentation is installed along with Dynamic C, and an icon for the docu-
mentation menu is placed on the workstation's desktop. Double-click this icon to reach the
menu. If the icon is missing, create a new desktop icon that points to
folder, found in the Dynamic C installation folder.
docs
The latest versions of all documents are always available for free, unregistered download
from our Web sites as well.
The Dynamic C User's Manual provides detailed instructions for the installation of
Dynamic C and any future upgrades.
NOTE: If you have an earlier version of Dynamic C already installed, the default instal-
lation of the later version will be in a different folder, and a separate icon will appear on
your desktop.
Once your installation is complete, you will have up to three icons on your PC desktop.
One icon is for Dynamic C, one opens the documentation menu, and the third is for the
Rabbit Field Utility, a tool used to download precompiled software to a target system.
If you have purchased any of the optional Dynamic C modules, install them after installing
Dynamic C. The modules may be installed in any order. You must install the modules in
the same directory where Dynamic C was installed.
8
Start > Run
file on your CD drive. Click
setup.exe
setup.exe
from the Windows Start
OK
file.
default.htm
button and
to begin the
in the
Wolf (BL2600)