Use Of Bl2600 With Sf1000 Serial Flash Card; Tcp/Ip Sample Programs; Bl2600 Libraries - Z-World Wolf BL2600 User Manual

•
DAC_VOLT_SYNC.C
voltmeter. The output voltage is computed with using the calibration constants that are
stored in the reserved EEPROM.
The D/A converter circuit is set up for synchronous operation, which updates the D/A
converter output when the
updated with values previously written via the

4.2.6 Use of BL2600 with SF1000 Serial Flash Card

The following sample programs found in the
demonstrate the use of the optional SF1000 serial flash card on the BL2600. The SF1000
User's Manual contains additional information and API functions for the SF1000.
•
FLASH_PATTERN_INSPECT.C
SF1000, which can then be inspected or cleared by the user. The user then has the
option to either inspect or clear a page of serial flash memory.
•
SFLASH_TEST.C
Once the sample program is compiled and run, it displays a message in the Dynamic C
window to report whether the test was successful.
STDIO

4.2.7 TCP/IP Sample Programs

TCP/IP sample programs are described in Chapter 5.

4.3 BL2600 Libraries

Two library directories provide libraries of function calls that are used to develop applica-
tions for the BL2600.
—libraries associated with features specific to the BL2600. The functions in the
•
BL2600
library are described in Section 4.4, "BL2600 Function APIs."
BL26xx.LIB
•
RN_CFG_BL26.LIB
boards.
—libraries specific to using TCP/IP functions on the BL2600. Further informa-
•
TCPIP
tion about TCP/IP is provided in Chapter 5, "Using the TCP/IP Features."
User's Manual
—Demonstrates how to output a voltage that can be read with a
anaOutStrobe
—Writes a pattern to the first 100 sectors of the
—Demonstrates how to read and write data from/to the SF1000.
—used to configure the BL2600 for use with RabbitNet peripheral
function call executes. The outputs will be
or
anaOut anaOutVolts
subdirectory in
SF1000
function calls.
SAMPLES\BL2600
39