Table of Contents
Advertisement
1.3 Development and Evaluation Tools
1.3.1 Tool Kit
A Tool Kit contains the hardware essentials you will need to use your own BL2600 single-
board computer. The items in the Tool Kit and their use are as follows.
• BL2600 User's Manual with schematics (this document).
• Dynamic C CD-ROM, with complete product documentation on disk.
• Programming cable, used to connect your PC serial port to the BL2600.
• Power supply, used to power the BL2600. If you are using another power supply, it must
provide 9 to 36 V DC at 12 W.
• Stand-offs to serve as legs for the BL2600 board during development.
• Demonstration Board with pushbutton switches and LEDs. The Demonstration Board
can be hooked up to the BL2600 to demonstrate the I/O and the TCP/IP capabilities of
the BL2600.
• Wire assembly to connect Demonstration Board to BL2600.
• Connector pins and parts to build your own wire assemblies: 0.1" crimp terminals;
0.156" crimp terminals; 1 × 4, 1 × 10, and 1 × 13 friction-lock connectors.
• Rabbit 3000 Processor Easy Reference poster.
• Registration card.
Programming
Cable
DIAG
PROG
Dingo (BL2600)
C-Programmable Single-Board Computer with Ethernet
User's Manual
019–0138 • 040331–A
User's Manual
User's Manual
Plastic Stand-Offs
Connector Pins
Demo Board
Wiring Harness
Figure 1. BL2600 Tool Kit
Power Supply
(North American
kits only)
Friction-Lock Connectors
& Crimp Terminals
H2
LED1 LED2 LED3 LED4
· ·
1-2
· ·
DEMO BOARD
3-4
BUZZER
· ·
5-6
SW1
SW2
SW3
SW4
Demo Board
3
Advertisement
Table of Contents
