Appendix C. Demonstration Board; Connecting Demonstration Board - Z-World Wolf BL2600 User Manual

Appendix C shows how to connect the Demonstration Board to
the BL2600.
C.1 Connecting Demonstration Board
Before running sample programs based on the Demonstration Board, you will have to con-
nect the Demonstration Board from the BL2600 Tool Kit to the BL2600 board. Proceed as
follows.
1. Use the wires included in the BL2600 Tool Kit to connect header J1 on the Demonstra-
tion Board to screw-terminal headers J1 and J12 on the BL2600. The connections are
shown in Figure C-1 for sample program
Figure C-2 for sample program
Figure C-3 for sample program
2. Make sure that your BL2600 is connected to your PC via the programming cable and
that the power supply is connected to the BL2600 and plugged in as described in
Chapter 2, "Getting Started."
User's Manual
D
EMONSTRATION
and for sample program
DIGIN.C
and for sample program
DIGOUT.C
HIGH_CURRENT_IO.C
A
PPENDIX
B
OARD
SMTP.C
, and in
SSI.C
.
C.
, in
81