How To Set Up Your Computer's Ip Address For A Direct Connection - Z-World Wildcat BL2000 User Manual

5.2.2 How to Set Up your Computer's IP Address for a Direct Connection

When your computer is connected directly to the BL2000 via an Ethernet connection, you
need to assign an IP address to your computer. To assign the PC the address
with the netmask
10.10.6.101
Click on
Start > Settings > Control Panel
ble-click the Network icon. Depending on which version of Windows you are using, look
for the TCP/IP Protocol
click on this line or select
up the TCP/IP properties dialog box. You can edit the IP address and the subnet mask
directly. (Disable "obtain an IP address automatically.") You may want to write down the
existing values in case you have to restore them later. It is not necessary to edit the gate-
way address since the gateway is not used with direct connect.
IP 10.10.6.101
Netmask
255.255.255.0
54
255.255.255.0
/ Network > Dial-Up Connections
Properties or Local Area Connection > Properties
User's PC
Ethernet
crossover
cable
Direct Connection PC to BL2000 Board
, do the following.
to bring up the Control Panel, and then dou-
/ Network
BL2000
Board
line or tab. Double-
to bring
Wildcat (BL2000)