Development And Evaluation Tools; Tool Kit - Z-World Fox LP3500 User Manual

1.4 Development and Evaluation Tools

1.4.1 Tool Kit

A Tool Kit contains the hardware essentials you will need to develop applications with the
LP3500 single-board computer. The items in the Tool Kit and their use are as follows.
• LP3500 User's Manual with schematics (this document).
• Dynamic C CD-ROM, with complete product documentation on disk.
• Programming cable, used to connect your PC serial port to the LP3500.
• AC adapter, used to power the LP3500 via the Prototyping Board. The AC adapter is
supplied with Tool Kits sold in the North American market. If you are using another
power supply, it must provide 3 to 30 V DC.
• Prototyping Board with pushbutton switches, LEDs, and screw-terminal headers. The
Prototyping Board can be hooked up to the LP3500 to demonstrate the I/O capabilities
of the LP3500 and to provide a prototyping area for you to develop your own add-on
circuits. The screw-terminal headers extend the LP3500's headers for development, and
can also be used in a production environment.
• Plastic enclosure with four screws.
• Four stand-offs with mounting screws.
• Screwdriver.
• Rabbit 3000 Processor Easy Reference poster.
• Registration card.
DIAG
PROG
Fox (LP3500)
C-Programmable Single-Board Computer
User’s Manual
019–0111 • 020815–A
4
GND
VIN
J4 R1
J41 J42 J43
J3
3 V VBAT GND RxE TxE GND RxC TxC GND RxB TxB GND + 485 – GND +K OUT9 OUT8 OUT7 OUT6 OUT5
Figure 1. Tool KitLP3500 Tool KitTool Kit
(North American
kits only)
RN1
VIN
VIN GND
GND
D1
J44
OUT4 OUT3 OUT2 OUT1 OUT0 J5
Fox (LP3500)