Account Codes - Samsung iDCS500 User Manual

Samsung iDCS500

ACCOUNT CODES

When it is equipped with optional equipment, your system allows calls to be
charged to different accounts. You can enter an account code either during a call or
when the external party hangs up.
To enter an account code during a call:
1. Press Recall, listen for confirmation tone and dial 47. Your call is inter-
rupted temporarily.
2. Dial the account code (a maximum of 12 characters, which can include V
and #).
3. Press Recall or V to return to the conversation.
If you make an error, repeat the procedure with the correct code. Only the last ac-
count code dialled will be recorded.
To enter an account code after the external party hangs up:
1. Press Recall, listen for confirmation tone and dial 47.
2. Dial the account code (a maximum of 12 characters, which can include V
and #).
Note: If you wait for the external party to hang up, you must complete this procedure
within 10 seconds. You cannot repeat the procedure if you make a mistake.
FORCED ACCOUNT CODES
n
Th e system administrator can program individual extensions to prevent external
calls being made until an account code is entered. If this is the case with your ex-
tension, then to make an external call:
1. Lift the handset, wait for dial tone, and dial 47.
2. Dial the account code (a maximum of 12 characters, V and # are not al-
lowed).
3. Press the V key.
You hear confirmation tone followed by dial tone. An external call can now be made.
Note: Only one call can be made for each code entry—the above procedure must be
used for each call.
–21–
SLT User Guide