Erasing Memory Buttons; Changing The Lcd Display - PROCEED PRE User Manual

erasing memory buttons

changing the lcd display

34
To erase the Memory Buttons, follow these steps:
1 Select the mode (AUD or SAT) in which you want to erase the
Memory button.
Press the corresponding Device button (
2
mute button simultaneously .
the Memory button to be erased.
LCD.
Press the
3 channel +
Memory button is now erased.
Any previously stored commands on a Memory button will be erased
NOTE:
when new commands are stored on the same Memory button.
Twenty-four different LCD displays can be selected for each Device mode of
the remote control. To select an alternate LCD display , please use the following
procedure:
Press-and-hold the Device button for which you would like to
1
change the LCD setting.
2 While pressing the Device button, press-and-release the
button. Each time the
pause
LCD will show one of twenty-four displays.
Release the Device button when you find the new LCD dis-
3
play you wish to assign to the Device mode.
• CHOICE OF LCD DISPLAYS
TV VCR
DVD AUX
TAPE1 TAPE2
AUX2 LD
• LCD DISPLAYS IN THE AUTOMATIC AUDIO MODE
A-TV A-VCR
A-DVD A-AUX
A-TA1 A-TA2
A-AX2 A-LD
audio
SET will appear in the LCD. Press
M(1-5)_##
button. will flash in the LCD. The
SAVE
button is pressed, the
pause
CABLE SAT AUDIO
TV2 VCR2 TUNER
WEBTV SURR DAT
AUD2 LIGHT DSS
A-CAB A-SAT AUDIO
A-TV2 S-VC2 A-TUN
A-WEB A-SUR A-DAT
A-A2 A-LIT A-DSS
or ) and
sat
will appear in the
CD
AMP
PROJE
AV
A-CD
A-AMP
A-PRJ
A-AV