Setting Input Offsets - PROCEED PRE User Manual

Setting Input Offsets

18
The PRE allows you to eliminate the sometimes significant differences in out-
put between your various source components by adjusting the input offset of
each input. Once adjusted, switching between sources will automatically intro-
duce an change in volume within the PRE to "offset" the differences between
your components. This can avoid abrupt changes in level which might other-
wise disrupt your listening sessions.
1 PRESS AND HOLD THE INPUT BUTTON YOU WISH TO ADJUST
Hold the button for approximately 5 seconds, until the indicator
input
LED above the selected input begins to blink. The
show the current input offset (initially 0 on all inputs).
2 USE THE VOLUME +/– BUTTONS TO ADJUST THE RELATIVE VOLUME
The buttons will now adjust the relative change in volume
volume +/–
introduced when switching between different inputs. If no change is
made the PRE will "time out" after a few seconds of inactivity , returning
to normal operation.
3 PRESS AND HOLD THE INPUT BUTTON TO CONFIRM YOUR CHANGE
Changes in the way the PRE normally operates require a conscious, de-
liberate act on your part. This is done to minimize the chance of having
your system changed accidently by someone who is simply exploring its
buttons. Thus (as outlined here) you must Hold a button, Change a set-
ting, and then Hold the button a second time to confirm your change.
will now
main display