Erasing Learned Functions; Operation - PROCEED PRE User Manual

erasing learned functions

operation

To erase learned functions, please refer to the following procedures:
Erasing Individual Buttons:
Press the Device button for the mode where the learned func-
1
tion has been stored.
2 Press-and-hold the Device and the
for about three seconds, until the LCD shows LEARN.
Press-and-release the button to be erased. The LCD will show
3
.
READY
Press the
4 light
Device Mode
Repeat steps 3 and 4 for any other buttons to be erased.
To return to the normal operating mode, press the Device
5
and buttons simultaneously.
play
The learned functions on the selected buttons have now been erased.
The pre-programmed functions for these buttons will now operate on the
remote control.
Erasing All Buttons in One Device Mode:
Press the Device button for the mode to be erased.
1
Press-and hold the Device and
2
for about three seconds, until the LCD shows
3 Press-and-hold the Device and
for approximately five seconds and then release the buttons.
The LCD will flash
Device Mode
When the LCD on the remote returns to the
NOTE:
functions in the selected Device mode have been erased. All the buttons in that
Device mode will now operate with the preprogrammed functions in that mode.
Erasing All Buttons in All Device Modes:
Press-and-hold the
1
multaneously , for approximately ten seconds. The LCD will
flash ERASE ten times, flash
mode.
When the LCD on the remote returns to
eight Device modes have been erased. All the buttons in all Device modes
will now operate with the preprogrammed functions in their respective modes.
After you have programmed the remote control for your equipment, use the
following procedures to operate your home entertainment system:
Press the Device button that you wish to operate: e.g., to oper-
1
ate a TV press the
vcr Device button, etc.
Aim the remote control at the device and press the
2
button to turn on the device.
standby
3 Press the buttons that send out the commands you desire.
play
button. The LCD will flash
and then return to
LEARN
buttons simultaneously ,
play
light buttons simultaneously
and then alternately
ERASE
.
Device Button and the
tv
CLEAR and then return to the TV
, all the learned functions in all
tv
tv Device button; to operate a VCR, press the
buttons simultaneously ,
, , the
ERASE CLEAR
.
.
LEARN
and the
CLEAR
Device Mode , all the learned
button si-
light
power/
25