Memory Buttons - PROCEED PRE User Manual

memory buttons

power
standby
adjust channel
input record
mute
Memory Buttons
m1 m2 m3 m4
path
light
32
Press either the
3
Control or the
Control. VCR or
Device button selected.
The VCR or CD Transport Controls (Play , Stop, Fast Forward, Rewind, Pause
and Record) will now override the original functions of the buttons in this
mode.
To return to the original setting, follow these steps:
Select the mode that you want to turn off the Transport Con-
1
trol "Punch-Through" and press the corresponding Device
button and the
the LCD.
Press the
2 play
Press the same Device button again. The Device mode will
3
flash in the LCD.
The VCR or CD Transport Control "Punch-Through" is now turned off. The
original functions assigned to these buttons are restored.
There are five memory buttons (
store up to 15 commands in each button. Pressing any one of the memory
buttons will send out the series of commands that are stored in that button.
Y ou can either turn on or off up to eight devices by storing Power on/off
commands or use it to select the favorite channels by storing channel numbers
into the button. Y ou can also combine Power on/off, select favorite channel
and any of the features in the remote control to these buttons.
Y ou can program any of the memory buttons (
mode and it will send out the stored commands in Audio, CD, DVD and
AUD
AUX modes. Y ou can also program the memory buttons in
will send out the stored commands in Satellite, TV , VCR and CBL modes.
• MACRO COMMANDS:
Memory Buttons can store and emit up to 15 commands including multiple
Power On/Off sequences. As an example, in the Audio mode, the
Memory Button can be programmed to turn on the TV , turn on the
standby
PRE, turn on the VCR and turn on the Satellite receiver with one button push.
• FAVORITE CHANNELS:
Memory Buttons can provide direct access to your channel with a one-button
push. As and example, in the SAT device mode each of the Memory Buttons
m2 , m3 and m4 can provide direct access to a different satellite channel by send-
ing out the three-digit channel number for that channel to your satellite receiver
with a one-button push.
Device button to set-up for VCR Transport
vcr
cd Device button to set-up for CD Transport
CD will flash in the LCD, depending on the
button simultaneously.
mute
button. will appear in the LCD.
PUNCH
~ ,
m1 m4 power/standby
~
m1
will appear in
SET
) that are designed to
, ) in
m4 power/standby
SAT mode, and it
power/
m1
,