PROCEED PRE User Manual page 16

Caution!
Caution!
16
10 AC MAINS FUSE AND AC POWER RECEPTACLE
An ac mains fuse is provided which disconnects the PRE from the wall
outlet's AC power under fault conditions. If this fuse should "blow" for
any reason, replace it only with the same value fuse (0.5A/250V slo-blo
5x20mm).
Replacing the ac mains fuse with a anything other than the
recommended value fuse will places the PRE at substantial
risk of damage!
Plug the supplied three-prong power cord into the
ceptacle provided before plugging the power cord into the wall. If a
longer AC power cord is required for your application, be sure to use a
three-conductor power cord which conforms to IEC standards.
The Proceed PRE has been safety-tested and is designed
for operation with a three-conductor power cord. Do not
defeat the "third pin" or earth ground of the AC power cord.
ac power input re-