Appendix D Electra Elite Ipk Ii Iad(8)-U( ) Etu Installation; Introduction; Installing Iad(8)-U( ) Etu Package; Description - NEC Electra Elite IPK II Installation And Maintenance Manual

A p p e n d i x D
___________________________________________________________________________________
S 1 I
ECTION NTRODUCTION
The IAD(8)-U( ) ETU provides the hardware platform for providing Voice Over IP
connectivity for the KTS. By default, this card is shipped from NEC with a "platform
support" (factory default) firmware. A functional firmware is loaded as part of the
installation to support the desired VoIP functionality (for example, H.323 Trunk
package).
In this document, loading of a H.323 Trunk Card package on to the IAD(8)-U( ) is
provided. The same procedure applies for any other application package.
S 2 I
ECTION NSTALLING
2.1
___________________________________________________________________________________
Hardware, Installation and Maintenance Manual
Electra Elite IPK II IAD(8)-U( ) ETU
Installation
IAD(8)-U( ) ETU P

Description

The IAD(8)-U( ) ETU is an optional interface for the Electra Elite IPK II KSU
that is used as integration device. The IAD(8)-U( ) ETU will support various IP
applications (e.g., IP CCH ETU application, H.323 Trunk card application, and
Megaco Station application).
Refer to Figure D-1 IAD (8)-U( )
ACKAGE
ETU.
D - 1