Bulb Replacement - Belling BI902MFCT User Manual

Standard shelves

BULB REPLACEMENT

Risk of electric shock!
Glass cover
You must replace a damaged glass cover. Suitable glass covers may be obtained from the after-sales
service.
For replacement, proceed as follows:
1. Disconnect power from the mains outlet or switch off the circuit breaker
of the unit's mains outlet.
2. Unscrew the glass lamp cover by turning it counter-clockwise (note, it
may be stiff) and replace the bulb with a new one of the same type.
3. Screw the glass lamp cover back in place.
Note: Only use 25-40W/220V-240V, T300°C halogen lamps
1
19
Ensure the shelf is fully pushed
2
towards the back of the oven,
until the shelf stopper is
reached.
Slightly raise the shelf and
insert in the chosen shelf
position
Front of appliance