Group Programming - Sam4s ER-650 Operation And Program Manual

Group Programming

Up to 99 groups (the exact number is determined by memory allocation) are available to
summarize PLU sales. Group totals appear on reports, so that you can track sales of
different types of items.
To Program Groups
ER-650/650R
♦ The group descriptors programmed here will replace the default descriptors
GROUP 1 through GROUP 99 that appear on reports.
♦ Each PLU can report totals to one, two or three different groups. If a PLU
sends totals to more than one group, the group total that appears on the Group
report will not represent PLU sales. Therefore, you also have the option of
deciding whether each group's total will add to the group total on the Group
report.
1. At the PGM control lock position menu, press 1 for GROUP. The GROUP
PROGRAM. screen displays: (The maximum group number is set by memory
allocation.)
GROUP PROGRAMMING
GROUP NO? (1-20)
2. Enter the number of the group to be programmed, press ENTER. The
GROUP# PROG. screen displays:
GROUP #1 PROG.
DESC : GROUP 1
ADD TO GROUP TTL
SEND TO KP
KP PORT# : 1 2 R
PRINT RED ON KP
0
Y
N
N N Y
N
Program Mode Programming • 131