Datatran Operation Menu; Initialize Eft - Sam4s ER-650 Operation And Program Manual

DataTran Operation Menu

Initialize EFT

Select Initialize EFT to verify communications, software versions and installed networks.
List of Installed Networks
Status of Installed
ER-650/650R
1. Turn the control lock to the Clear Totals position to display the RESET
REPORT MODE menu.
2. Press 00 to display the DataTran Operation menu:
DATATRAN OPERATION
0.INITIALIZE EFT
1.OPEN BATCH
2.CLOSE CURR. BATCH
3.CLEAR CURR. BATCH
4.CHG. BATCH NUMBER
5.ISSUE LOCAL TOTAL
6.ISSUE TRANSACTION
3. If necessary, press PAGE DOWN to display the second page of the DataTran
Operation menu:
DATATRAN OPERATION
7.ISSUE BATCH STATUS
8.DIAL IN LOAD
9.DIAL OUT LOAD
00.TIP OPERATION
4. Review the explanations that follow and select the appropriate operation.
DATE 5/24/2004 THU TIME 16:15
** LIST INSTALLED NETWORRKS **
CHK DEN --- --- VER:3.89
OFF ON OFF OFF
EMPLOYEE1 NO.000019 REG 01
Software Version
Integrated Payment Appendix • 259