Sam4s ER-650 Operation And Program Manual page 24

KEY
SCALE
SERVICE
TABLE
TARE
TAX EXEMPT
TAX SHIFT 1-4
TIME IN/OUT
TIP
VOID ITEM
WASTE
YES/NO
VALIDATION
12 • Getting Started
Description
Use to make weight entries. When a scale is attached, press the scale key to
show the weight in the display, then press (or enter) a PLU to multiply the
weight times the price. When a scale is not attached, you can manually enter
the weight (using the decimal key for fractions). PLUs may be programmed
to require an entry through the scale key.
Use to temporarily finalize Previous Balance or check tracking transactions.
You can enforce the entry of a table number for guest check transactions, or for
all transactions. If you are tracking guest check balances, the balance can be
recalled either by entering the check number or the table number.
Tares are container weights. If you are using the scale function, you can
preset up to 5 different tare weights. The tare can be subtracted automatically
when a specific PLU is registered, or the tare can be subtracted by manually
inputting the tare number and pressing the TARE key. Tare #5 can be
programmed for entering tare weights manually.
Press the TAX EXEMPT key to exempt tax 1, tax 2, tax 3, and/or tax 4 from
the entire sale.
Press to reverse the programmed tax status of a PLU. For example, by
pressing the appropriate TAX SHIFT key prior to registering a taxable
item, the item will be sold without sales tax added.
Use to track hours worked by an employee, as would be done by a time
clock.
The TIP key allows a gratuity to be added to a guest check before payment.
The tip amount is deducted from the Cash-in-Drawer amount for the
Clerk/Cashier closing the guest check.
The TIP key may be programmed as either a percentage or amount. If
programmed as a percentage, tax programming defines whether the
percentage is calculated on the net amount, or the amount after taxes.
Use to void an item previously entered within a transaction by pressing
VOID, then re-entering the item you wish to remove.
The WASTE key allows control of inventory by accounting for items which
must be removed from stock due to spoilage, breakage or mistakes. Press the
WASTE key before entering wasted items, then press the WASTE key again
to finalize. The WASTE key may be under manager control, requiring the
control lock to be in the X position. The WASTE key is not allowed within a
sale.
Press to toggle from Y (yes) to N (no) when selecting program options.
Press to initiate a single line validation. Note that an optional printer with
validation capability must be attached to the ER-650/650R and identified.
ER-650/650R