System Option Programming - Sam4s ER-650 Operation And Program Manual

System Option Programming

The 1st System
Option screen.
Press
PAGE DOWN
to view the 2
System Option
screen.
Press
PAGE DOWN
to view the 3
System Option
screen.
Press
PAGE DOWN
to view the 4
System Option
screen.
142 • Program Mode Programming
1. At the PGM control lock position menu, press 3 for SYSTEM OPTION
Programming. The SYSTEM OPTION pg 1 screen displays:
2. Refer to "System Options - Reference Information" on page 146 to make program
entries or changes, press the ENTER key to finalize.
SYSTEM OPTION pg 1
BEEPER ACTIVE
REAL CLERK KEY
CLERK ENTRY
0:PUSH 1:CODE
CLERK ASSIGNED WHEN
CLERK KEY IS
PUSHED (1-10)
SYSTEM OPTION pg 2
CLERK IS Y:POP-UP N
nd
DRAWER NEEDS TO BE
SHUT TO OPERATE
ACTIVATE OPEN
DRAWER ALARM
SYSTEM OPTION pg 3
SECONDS TO ALLOW
rd
DRAWER OPEN
ALLOW POST TENDER N
OPEN DRAWER ON
POST TENDER
ALLOW MULTIPLE
RECEIPT
SYSTEM OPTION pg 4
CASH DECLARATION REQ
th
BEFORE REPORTS
MGR CONTROL TO TEND.
NEGATIVE BALANCE N
ZERO BALANCE
RESET TRANSACTION
NO. ON Z REPORT
N:STAY-DOWN
30
Y
N
Press ENTER
after making a
0
change, or press
ENTER to
advance the
arrow to the
next option
1
without making
a change.
Press PAGE UP
to return to the
previous screen.
Y
N
NOTE:
Be sure to press
ENTER after
changing a
selection. If you
do not press
ENTER, the
change will not
be accepted.
Y
N
N
Press YES/NO
to toggle from
'Y' to 'N' for yes
N
or no decisions.
N
ER-650/650R