Reset Electronic Journal; Pc Communication - Sam4s ER-650 Operation And Program Manual

Reset Electronic Journal

An electronic journal feature is available on the ER-650/650R. The electronic journal
captures the sales journal in the register memory. If you intend to use the electronic journal,
you must allocate sufficient memory (see "Memory Allocation" in the "Service Mode
Programming" chapter) and activate the journal and set related journal capture options (see
"System Option Programming " in the "Program Mode Programming" chapter.)
Use this to clear the journal memory. The journal will not be printed. To read all or
selected parts of the E.J., see "E.J. 0peration" in the "X-Mode" chapter.

PC Communication

To be polled by a PC, the register must be placed in the PC ONLINE MODE.
You can place the register in ONLINE MODE manually by selecting the PC
COMMUNCATION function from the RESET REPORT MODE menu. If you wish to
complete unattended polling, you can program the ER-650/650R to automatically enter the
PC ONLINE MODE at a scheduled time. See "PC Schedule Time" in the in the "Program
Mode Programming" chapter to set a polling time.
You must also configure one of the RS232C ports for PC communications. See the "Service
Mode Programming" chapter.
Note: PC polling requires optional polling software. Contact your authorized dealer for
information.
94 • Z Mode
1. From the RESET REPORT MODE menu press 2 to clear the electronic journal:
RESET ELECT.JOURNAL
ARE YOU SURE ?
2. The screen asks: ARE YOU SURE ? Press the YES/NO key to toggle to
yes, then press ENTER to clear the report.
NO
ER-650/650R