Adding And Removing A Pc Card - Gateway E-155C Technical Reference Manual

2
Adding and removing a
PC Card
Your convertible notebook has a PC Card slot (also known as
a PCMCIA card slot). This slot accepts one Type II card. You
do not need to restart your convertible notebook when changing
most cards because your convertible notebook supports
hot-swapping. Hot-swapping means that you can insert a
PC Card while your convertible notebook is running. If your
PC Card does not work after hot-swapping, see the PC Card
manufacturer's documentation for further information.
To insert a PC Card:
•
To remove a PC Card:
1
2
www.mpccorp.com
Pull the memory card out of the convertible notebook.
Push the card firmly into the PC Card slot, label-side up,
until the outer edge of the card is flush with the side of
your convertible notebook.
Turn off your convertible notebook, then go to
-OR-
Double-click or double-tap the remove hardware icon in
the taskbar. The Safely Remove Hardware dialog box
opens.
Important
If the remove hardware icon does not appear on the taskbar, click
or tap the show hidden icons
Click or tap the PC Card name, then click or tap Stop.
The Stop a Hardware device dialog box opens. If using
Windows XP, go to step 5.
button.
Step 5.
53