Removing A Memory Card; Adding And Removing A Pc Card - Gateway Notebook Reference Manual

Removing a memory card

the memory card. If you use the remove hardware icon, your notebook may
not recognize your memory card reader until you restart your notebook.
To remove a memory card:
1
2
Adding and removing a
PC Card
Your notebook has a PC Card slot (also known as a PCMCIA
card slot). This slot accepts one Type II card. You do not need
to restart your notebook when changing most cards because
your notebook supports hot-swapping. Hot-swapping means
that you can insert a PC Card while your notebook is running.
If your PC Card does not work after hot-swapping, see the
PC Card manufacturer's documentation for further
information.
To insert a PC Card:
•
50
CHAPTER 4: Using Drives and Accessories
Important
Do not use the remove hardware
Push the memory card into the notebook. The memory
card pops out slightly.
Pull the memory card out of the notebook.
Push the card firmly into the PC Card slot, label-side up,
until the outer edge of the card is flush with the side
of your notebook.
icon in the taskbar to remove