Removing A Memory Card; Adding And Removing A Pc Card - Gateway Convertible notebook Reference Manual

Removing a memory card

the memory card. If you use the remove hardware icon, your convertible
notebook may not recognize your memory card reader until you restart your
convertible notebook.
To remove a memory card:
1
2
Adding and removing a
PC Card
Your convertible notebook has a PC Card slot (also known as
a PCMCIA card slot). This slot accepts one Type II card. You do
not need to restart your convertible notebook when changing
most cards because your convertible notebook supports
hot-swapping. Hot-swapping means that you can insert a
PC Card while your convertible notebook is running. If your
PC Card does not work after hot-swapping, see the PC Card
manufacturer's documentation for further information.
To insert a PC Card:
•
www.gateway.com
Important
Do not use the remove hardware
Push the memory card into the convertible notebook.
The memory card pops out slightly.
Pull the memory card out of the convertible notebook.
Push the card firmly into the PC Card slot, label-side up,
until the outer edge of the card is flush with the side
of your convertible notebook.
icon in the taskbar to remove
49