Settings; Clock; Backlight - CipherLab 8200 Reference Manual

8200 Series Mobile Computer

3.2 SETTINGS

You can change the default settings here.
System Settings

Clock

Backlight

Contrast
Auto Off
Power On Options
Key Click
Speaker Volume
USB VCOM No.
USB Charge Current
System Password
Font
Default Set (=Reset to Default)
Reset Reader
Upgrade Reader FW
3.2.1 CLOCK
Set date and time for Real Time Clock. Enter two digits for the year, e.g. 04 for 2004.
3.2.2 BACKLIGHT
Set the backlight duration for the keypad and LCD.
Enter a value between 0 and 9999 (second).
Press the arrow keys [Up] and [Down] to adjust the backlight level (4 levels).
Press the [Left] key to adjust the shade effect.
38
Reference Manual
Default Values
Current time
20 seconds at level 2, backlight shade enabled
Level 4
10 minutes
Program Resume
Tone 2
High volume level
Fixed
500 mA
Open access
System font
Load factory settings
Restore default reader settings
Upgrade 2D reader firmware (For maintenance use only)