CipherLab 8200 Reference Manual page 82

8200 Series Mobile Computer
1) For initial association with an access point, you will see an antenna icon developing
on the screen to indicate that the mobile computer is processing a pre-share key.
2) After having generated the pre-share key, the mobile computer proceeds to establish
a connection with an access point, and you will see the whole antenna is flashing.
3) When the mobile computer has been connected to the access point successfully, you
will see the whole antenna and the indication of wireless signal strength.
The antenna icon will become ready and
flashes to indicate 8200 is connecting
to an access point under the same SSID.
Once connected, the antenna icon will
stop flashing. Next to the icon, the
more bars, the stronger the signal.
Note: If you are programming in C or BASIC, be aware that the antenna icon will appear
on the device screen after NetInit() or START TCPIP() is called. (WPA must be
enabled first!)
72
Reference Manual
The changing icon
8200 is processing a pre-share key.
Wait for a few seconds.
indicates