Backup Battery; Caution Of Low Battery Charge - CipherLab 8200 Reference Manual

8200 series mobile computer
Hide thumbs Also See for 8200:
Table of Contents

Advertisement

8200 Series Mobile Computer

1.1.2 BACKUP BATTERY

The backup battery on the main board takes charge when the main battery is removed or
drained out. When fully charged, the 3.0 V/18 mAh rechargeable Lithium button cell
helps retain data in SRAM and maintain the running of the real-time clock and calendar
for at least 25 days without the main battery. In the meantime, you have to replace the
main battery as soon as possible. It takes at least 72 hours to fully charge the backup
battery. However, it is not necessary to fully charge the backup battery for the mobile
computer to work.
Monitor voltage level (see

1.1.3 CAUTION OF LOW BATTERY CHARGE

The battery pack is the only power source for the mobile computer to work. It also
charges the backup battery on the main board so that the data stored in SRAM can be
retained properly. Therefore, when the main battery charge goes low, you need to
replace the battery pack with a charged one or charge it as soon as possible. Most of all,
you should upload important data on a regular basis.
Warning:
Data loss may occur with SRAM during low battery condition. Always save
data before running out of power or keep a fresh battery for replacement.
10
Reference Manual
3.5
Power)

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8200 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

This manual is also suitable for:

82308260

Table of Contents

Save PDF