Keypad Seems Not Working; Vibrator Seems Not Working; Mobile Computer Seems Not Working; Cannot Scan Barcodes - CipherLab 8200 Reference Manual

8200 Series Mobile Computer

KEYPAD SEEMS NOT WORKING

Perform the keyboard test. (See
If the problem persists, reload the battery pack and perform the test again.

VIBRATOR SEEMS NOT WORKING

Perform the vibrator test. (See
If the problem persists, reload the battery pack and perform the test again.

MOBILE COMPUTER SEEMS NOT WORKING

Upload all data to the host and perform the memory test. (See
If the problem persists, reload the battery pack and perform the test again.

CANNOT SCAN BARCODES

LOW BATTERY CONDITION

Check if the battery icon on the screen indicates a low battery status. If so, replace it
with a fresh battery then.
If the problem persists, check if the battery contacts get dirty or the battery pack
does not fit to the compartment.

BARCODE READER PROBLEM

Perform the reader test to see if the reader is working. (See
If the problem persists, reload the battery pack and perform the test again.

CANNOT DECODE DATA AFTER SCANNING

UNREADABLE BARCODE

Check if the barcode is defaced. A defaced barcode may not be readable.

UN-PROGRAMMED TO READ

Check if the scanner is programmed to read the symbologies (types of barcode) that
you are trying to read.
Try scanning a test barcode of the symbology you are trying to read.

DIRTY SCAN WINDOW

Check if the scan window gets dirty. Wipe it with a clean and dry cloth, and try again.
92
Reference Manual
3.3.4 Keyboard.)
3.3.7 Vibrator.)
3.3.5 Memory.)
3.3.1 Reader.)