CipherLab 8600 Reference Manual
  1. Manuals
  2. Brands
  3. CipherLab Manuals
  4. Handhelds
  5. 8600
  6. Reference manual

CipherLab 8600 Reference Manual

8600 series mobile computer
Hide thumbs Also See for 8600:
Table of Contents

Advertisement

Quick Links

See also: User Manual
8600 Series Mobile Computer
8600/8630/8660
Version 1.02

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 8600 and is the answer not in the manual?

Questions and answers

Related Manuals for CipherLab 8600

Summary of Contents for CipherLab 8600

  • Page 1 8600 Series Mobile Computer 8600/8630/8660 Version 1.02...
  • Page 2 Due to continued product development this information may change without notice. The information and intellectual property contained herein is confidential between CIPHERLAB and the client and remains the exclusive property of CIPHERLAB CO., LTD. If you find any problems in the documentation, please report them to us in writing.

  • Page 3: For Canada

    IMPORTANT NOTICES FOR USA This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

  • Page 4: For Europe- Eu Declaration Of Conformity

    FOR EUROPE– EU DECLARATION OF CONFORMITY This device complies with the essential requirements of the R&TTE Directive 1999/5/EC. The following test methods have been applied in order to prove presumption of conformity with the essential requirements of the R&TTE Directive 1999/5/EC: EN 60950-1: 2006+A11:2009+A1:2010+A12:2011 Safety of Information Technology Equipment EN 301 489-1 V1.8.1: 2008...
  • Page 5 Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 kHz to 25 MHz and inductive loop systems in the frequency range 9 kHz to 30 MHz; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive EN 302 291-1 V1.1.1: 2005 Electromagnetic compatibility and Radio spectrum Matters (ERM);...

  • Page 6: For Product With Laser

    DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The use of any batteries or charging devices, which are not originally sold or manufactured by CipherLab, will void your warranty and may cause damage to human body or the product itself.

  • Page 7: Release Notes

    RELEASE NOTES Version Date Notes Modified: FOR EUROPE– EU DECLARATION OF CONFORMITY 1.02 May 08, 2014 >EN 301 489-1 V1.9.2: 2011 added >EN 301 489-17 V2.2.1: 2012 added >EN 302 291-1 V1.1.1: 2005 added >EN 302 291-2 V1.1.1: 2005 added Modified: 3.2.3 –...

  • Page 9: Table Of Contents

    CONTENTS IMPORTANT NOTICES ........................- 3 - For USA ............................- 3 - For Canada ............................ - 3 - For Hand-held Product with RF Functions ................... - 3 - For Europe– EU Declaration of Conformity.................. - 4 - For Product with Laser ........................- 6 - Safety Precautions ........................
  • Page 10 8600 Series Mobile Computer Reference Manual 1.6.1 Barcode Scanner......................20 1.6.2 RFID Reader ........................21 1.7 Charging & Communications ....................23 1.7.1 Interface Cable Options ....................25 1.7.2 Cradle Options........................26 1.8 SD Card ............................. 29 1.8.1 File System ........................29 1.8.2 Directory..........................29 1.8.3 File Name..........................
  • Page 11 8600 Series Mobile Computer Reference Manual 3.5 Power............................51 3.6 Load Program ........................... 52 3.7 DoFTP Menu..........................55 3.7.1 Local..........................56 3.7.2 Manual..........................56 3.8 Storage Menu ........................... 57 3.8.1 Run as USB Disk ......................57 3.8.2 Access SD Card ........................ 57 3.9 Bluetooth Menu ........................59...
  • Page 12 8600 Series Mobile Computer Reference Manual Speaker seems not working ......................99 LED indicators seem not working....................99 LCD seems not working ........................99 Keypad seems not working ......................100 Vibrator seems not working......................100 Mobile computer seems not working...................100 Cannot scan barcodes ........................100 Low battery condition.......................100...

  • Page 13: Introduction

    802.11b/g/n connectivity is also equipped enabling the mobile computer have access to the Internet. The 8600 Series Mobile Computer is bundled with powerful and rich features to ensure success in timely processing of information, and thus, makes an ideal choice for inventory control, shop floor management, warehousing and distribution operations.

  • Page 14: Terminal Models

    8600 Series Mobile Computer Reference Manual TERMINAL MODELS The wireless capabilities of 8600 Mobile Computer Series may vary depending on the specifications implemented. Please refer to the table below. Model WLAN (802.11 b/g/n) WPAN (Bluetooth 4.0) 8600 8630 √ √...

  • Page 15: Accessories

    Introduction ACCESSORIES Rich choices of optional accessories are available for you to enhance the total performance of the mobile computer. Swappable Keypad Hard-shell Pistol Grip (detachable) Spare Rechargeable Li-ion battery Snap-on RS-232 Cable Snap-on USB Cable Fast VPort Cable Charging & Communication Module (CRD-SCC-8S) Cradle Cup (CRD-SCP-86)

  • Page 16: Getting Started

    8600 Series Mobile Computer Reference Manual GETTING STARTED COMPONENT NAMES Figure 1: Overview...

  • Page 17: Inserting Battery & Memory Card

    Introduction INSERTING BATTERY & MEMORY CARD For shipping and storage purposes, save the mobile computer and the main battery in separate packages. This will keep both batteries in good condition for future use. Note: Any improper handling may reduce the battery life. 1) Hold the mobile computer still and slide the release latch to the right to unlock the battery cover.
  • Page 18 8600 Series Mobile Computer Reference Manual Figure 2: Installing the Memory Card & Main Battery...

  • Page 19: Installing Pistol Grip

    Introduction INSTALLING PISTOL GRIP This contoured pistol grip enables intuitive trigger-and-scan operation, which is very helpful in scan intensive applications. When a pistol grip is necessary, install it to the mobile computer by following these steps: 1) Place the terminal computer into the holder of the pistol grip. 2) Slide the release latch of the pistol against the terminal computer to lock it firmly, and then turn on the mobile computer to test the trigger.

  • Page 20: Initial Charging

    8600 Series Mobile Computer Reference Manual INITIAL CHARGING The main and backup batteries may not be charged to full for shipment. When you first receive the package, you will need to charge the batteries to full before use. Please refer 1.7 Charging &...

  • Page 21: Using The Mobile Computer

    Chapter 1 USING THE MOBILE COMPUTER This chapter explains the features and usage of the 8600 Series Mobile Computer. IN THIS CHAPTER 1.1 Battery..............10 1.2 Memory..............12 1.3 Keypad..............13 1.4 LCD ................. 17 1.5 Notifications.............. 18 1.6 Data Capture ............20 1.7 Charging &...

  • Page 22: Battery

    8600 Series Mobile Computer Reference Manual 1.1 BATTERY 1.1.1 MAIN BATTERY The mobile computer is powered by a rechargeable 3.7V 1100/2200 mAh Li-ion battery pack that may not be charged to full for shipment. When you first receive the package, you will need to charge the battery to full before use.

  • Page 23: Backup Battery

    Chapter 1 Using The Mobile Computer 1.1.2 BACKUP BATTERY The backup battery, a 3.0V/18mAh rechargeable Lithium button cell on the main board, takes charge of the retention of data in SRAM, real-time clock, and calendar when the main battery is removed or drained. When fully charged, the backup battery can work for at least 25 days without the main battery.

  • Page 24: Memory

    8600 Series Mobile Computer Reference Manual 1.2 MEMORY The collected data can be sent back to a host computer immediately over wireless networks, or stored in memory (SRAM) and uploaded later. The mobile computer is equipped with a calendar chip for accurate time/date logging. When the main battery is...

  • Page 25: Keypad

    Chapter 1 Using The Mobile Computer 1.3 KEYPAD The mobile computer is equipped with a keypad of 29/39 keys for system setup, user entry and so on. The keypad comes with programmable LED backlight for illumination that makes the key characters easier to read when ambient light gets weaker. Refer to 1.4 LCD for screen &...
  • Page 26 8600 Series Mobile Computer Reference Manual This alphanumeric keypad is set to numeral mode by default. Press the blue key at the bottom-right to toggle between upper-case alphabet, lower-case alphabet, and numeral modes. Press the orange key at the bottom-left to toggle between function and numeral modes.
  • Page 27 Chapter 1 Using The Mobile Computer Figure 5: 39-key Layout When in function mode, the orange key works with another key. Press the orange key and then its associated icon will be displayed on the top line of the screen. Press the second key, say [Del], to complete the key combination and delete the character where the cursor stays.
  • Page 28 8600 Series Mobile Computer Reference Manual ESC (Escape) This key on the left side of the SCAN key is used to stop and exit the current operation. Alphabet Key (the blue key) The blue key is an auxiliary key that requires pressing a second key to get the letter (A~Z) or symbol printed in blue on the second key (or on the keypad near the key).

  • Page 29: Lcd

    Chapter 1 Using The Mobile Computer 1.4 LCD The mobile computer comes with a TFT graphic LCD, 240 by 320 pixels resolution, which can be programmed to display text or graphics, such as specific font and company logo, to meet varying application needs. Options Font Size (pixels) Characters by lines...

  • Page 30: Notifications

    8600 Series Mobile Computer Reference Manual 1.5 NOTIFICATIONS 1.5.1 STATUS LED There are two dual-color LED indicators located at the upper-right of the screen. Both can be programmed to provide information that helps diagnosing. For example, if you are using AG runtime, you will be informed of the scanning result immediately. By default, LED1 is defined to light solid green for a single "Good Read"...

  • Page 31: Audio

    Chapter 1 Using The Mobile Computer LED1: Red/Green Green User Power ON User definable User definable Solid green for Good Read by default Power Off, Battery System default System default Charging Flashing red: Charging Flashing green: Charging done Charging Error System default Flashing red and green: Charging error occurs LED2: Blue/Green...

  • Page 32: Data Capture

    8600 Series Mobile Computer Reference Manual 1.6 DATA CAPTURE 1.6.1 BARCODE SCANNER A wide variety of scan engines is available for delivering flexibility to meet different requirements. Depending on the scan engine integrated, the mobile computer is capable of scanning barcodes of a number of symbologies that are enabled by default while running the preloaded AG runtime.

  • Page 33: Rfid Reader

    Chapter 1 Using The Mobile Computer Interleaved 25 Enabled Enabled Matrix 25 Disabled Disabled Chinese 25 Disabled Coop 25 Disabled Code 3 of 9 Code 39 Enabled Enabled Trioptic Code 39 Disabled Italian Pharmacode (Code 32) Disabled Disabled French Pharmacode Disabled EAN/UPC EAN-8...
  • Page 34 8600 Series Mobile Computer Reference Manual HF Tag Protocol UID Only Read Page Write Page ISO 14443A Mifare Standard 1K (Mifare S50) Mifare Standard 4K (Mifare S70) Jcop 41 (only Mifare 1K & 4K compatible) Mifare Ultralight Mifare Ultralight C...

  • Page 35: Charging & Communications

    Chapter 1 Using The Mobile Computer 1.7 CHARGING & COMMUNICATIONS Normally, the mobile computer ships with a USB or RS-232 cable for charging and communications. A variety of cradles are available to meet different requirements. If you are using USB Virtual COM for the first time, you must install its driver from the CD-ROM.
  • Page 36 8600 Series Mobile Computer Reference Manual RS-232 Interface Cable Task Cable Attached Charging 5V charging from the adaptor (Plug icon) Communications If using FORGE Application Generator software on your PC, you may use the included download utility to transfer data from PC to your mobile computer;...

  • Page 37: Interface Cable Options

    Chapter 1 Using The Mobile Computer 1.7.1 INTERFACE CABLE OPTIONS For charging via the USB cable, the standard charging current is 500 mA. However, we recommend that you connect the power adaptor to speed up charging the battery. If you connect the mobile computer to a USB hub, the charging current may be insufficient.

  • Page 38: Cradle Options

    8600 Series Mobile Computer Reference Manual 1.7.2 CRADLE OPTIONS A variety of cradles are developed for the mobile computer and ship on your option. These cradles employ different data connections, but they all support charging the mobile computer while transmitting data at the same time. Choose a cradle type that best suits your needs.
  • Page 39 Chapter 1 Using The Mobile Computer Figure 8: Setting up cradle...
  • Page 40 8600 Series Mobile Computer Reference Manual Charging & Communication Cradle Description Description Status LED (POWER) Cable Connector (USB or RS-232) Power Jack Battery Charger Description Description Status LEDs (POWER, CHARGE) Power Jack...

  • Page 41: Sd Card

    (n=1~6). 1.8.1 FILE SYSTEM For 8600 Series, it supports FAT12/FAT16/FAT32 and allows editing files through C programming or formatting the card via System Menu | 8. Next Page | 1. Storage Menu | 2. Access SD Card. Based on the capacity of the card, it will automatically...
  • Page 42 8600 Series Mobile Computer Reference Manual DAT Filename DAT file #1 TXACT1.DAT DAT file #2 TXACT2.DAT DAT file #3 TXACT3.DAT DAT file #4 TXACT4.DAT DAT file #5 TXACT5.DAT DAT file #6 TXACT6.DAT DBF Filename DBF file #1 Record file F1.DB0 System Default F1.DB1...

  • Page 43: File Name

    Chapter 1 Using The Mobile Computer DBF file #4 Record file F4.DB0 System Default F4.DB1 Index Index file #1 F4.DB2 Index file #2 F4.DB3 Index file #3 F4.DB4 Index file #4 F4.DB5 Index file #5 F4.DB6 DBF file #5 Record file F5.DB0 System Default F5.DB1...
  • Page 44 8600 Series Mobile Computer Reference Manual...

  • Page 45: Learning Software Architecture

    Chapter 2 LEARNING SOFTWARE ARCHITECTURE This chapter mainly describes the software inside the mobile computer. It consists of three modules — Kernel, System, and Application; each has a function menu. When a menu is displayed, you may select an item by either of the following ways: Press the [Up] and [Down] keys to move the highlight bar.
  • Page 46 8600 Series Mobile Computer Reference Manual Figure 9: Software Architecture IN THIS CHAPTER 2.1 Application Module ............. 35 2.2 System Configuration & Core........37...

  • Page 47: Application Module

    Chapter 2 Learning Software Architecture 2.1 APPLICATION MODULE The mobile computer ships with software package on the CD-ROM including FORGE Application Generator (Batch and WLAN versions), MIRROR Emulator (VT and 5250 versions), and download utilities. 2.1.1 FORGE APPLICATION GENERATOR (AG) FORGE Application Generator (AG) software package includes: Forge.exe/AG8600WLAN.exe on the host computer AG Runtime on the mobile computer...

  • Page 48: Mirror Emulator (Ciphernet)

    Companion Tool on PC End VT100/220 86xx-VT.SHX CipherNet-VT.exe IBM 5250 86xx-5250.SHX CipherNet-5250.exe 2.1.3 USER PROGRAM You may need to develop your own application program. For developing custom applications, CipherLab provides BASIC and C compilers through licensing. For detailed information, please contact your sales representative.

  • Page 49: System Configuration & Core

    For managing system configurations and multiple programs, each mobile computer comes with System Menu, Program Manager, and Kernel Menu. Refer to the following chapters on how to configure the 8600 Series Mobile Computer, regarding system configurations and program download. 2.2.1 SYSTEM MENU...
  • Page 50 8600 Series Mobile Computer Reference Manual...

  • Page 51: System Menu

    Chapter 3 SYSTEM MENU System Menu offers an interface for engineers (programmers or system integrator) to view system information, change the configuration parameters, download programs and run diagnostics. This menu is designed for engineering tests and maintenance ONLY. For this reason, it provides password protection to prevent unauthorized users from accidentally changing system settings.

  • Page 52: Information

    8600 Series Mobile Computer Reference Manual IN THIS CHAPTER 3.1 Information............... 40 3.2 Settings ..............42 3.3 Tests ............... 47 3.4 Memory..............50 3.5 Power ..............51 3.6 Load Program............52 3.7 DoFTP Menu.............. 55 3.8 Storage Menu............57 3.9 Bluetooth Menu ............59 3.10 Wi-Fi Menu..............

  • Page 53: Understanding Device Code

    Chapter 3 System Menu 3.1.1 UNDERSTANDING DEVICE CODE Device Code Modular Component Types 1st digit Reader module 0= none 1= CCD scan engine 2= Laser scan engine 3= 2D scan engine 2nd digit Wireless module 0= none 5= Bluetooth only 8= Bluetooth + 802.11b/g/n 3rd digit RFID/GPS module...

  • Page 54: Settings

    8600 Series Mobile Computer Reference Manual 3.2 SETTINGS You can change the default settings here. System Settings Default Values Clock Current time LCD Color Layer1 Primary: White Layer1 Secondary: None Layer 0: Black Backlight (LCD/Keypad) Battery Power Mode - Level: 3...

  • Page 55: Clock

    Chapter 3 System Menu 3.2.1 CLOCK Set date and time for Real Time Clock. Enter two digits for the year, e.g. 04 for 2004. 3.2.2 LCD COLOR Set the LCD color for Layer1 Primary (text color), Layer1 Secondary (background color of text), and Layer0 (background color of the screen) separately.

  • Page 56: Auto Off

    8600 Series Mobile Computer Reference Manual 3.2.4 AUTO OFF The mobile computer will be turned off automatically when no operation is taking place during a specified period of time. Enter a value between 0 and 999 (minute). Note: To disable this function, enter 0.

  • Page 57: Key Click

    By default, it is set to use one virtual COM port for all (=FIXED), regardless of how many 8600 mobile computers are connected to PC when USB Virtual COM is in use. This setting requires you to connect one 8600 at a time, and will facilitate configuring a great amount of 8600 mobile computers via the same virtual COM port (for administrators’...

  • Page 58: Font

    8600 Series Mobile Computer Reference Manual 3.2.10 FONT Font version information can be viewed here. It displays System Font if there is no custom font file. If a multi-language font file is downloaded, you will be able to select a font from the list.

  • Page 59: Tests

    Chapter 3 System Menu 3.3 TESTS Here provides functional tests for key parts. 3.3.1 READER Test the reading performance of the scanner. The supported symbologies depend on the scan engine you use. Refer to 1.6 Data Capture for symbologies that are enabled by default.

  • Page 60: Echo Test

    8600 Series Mobile Computer Reference Manual Warning! The contents of the data memory (SRAM) will be wiped out after test. 3.3.6 ECHO TEST After a physical connection is established properly, run a test utility on your computer and start the test on your mobile computer. Select a desired baud rate if necessary.
  • Page 61 Chapter 3 System Menu Satellite Number Displays how many GPS satellites are in view. Displays Carrier/Noise Ratio measured in dB.

  • Page 62: Memory

    8600 Series Mobile Computer Reference Manual 3.4 MEMORY Here provides information and initialization function of the memory. 3.4.1 SIZE INFORMATION — onboard SRAM for data memory Flash — program memory 3.4.2 INITIALIZE Initialize the data memory. Warning! The contents of the data memory (SRAM) will be wiped out after memory...

  • Page 63: Power

    Chapter 3 System Menu 3.5 POWER Here shows current voltage consumption. Main (battery) It shows dynamic status of the battery pack, which is used as the main power source. Backup (battery) It shows dynamic status of the button cell, which is used to retain data in SRAM. Warning! Always examine the battery icon on the device screen so that you will be alerted for a low battery condition.

  • Page 64: Load Program

    8600 Series Mobile Computer Reference Manual 3.6 LOAD PROGRAM Here you can access the Load Program service provided by the kernel. Because the kernel will take over the job, you will not be able to return to System Menu by pressing [ESC].
  • Page 65 Chapter 3 System Menu SETTINGS Interface Options Description RS-232 Proceed to configure baud rate settings on your computer and the mobile computer. USB VCOM Connect the USB cable between your computer and the mobile computer. Bluetooth Approach the target Bluetooth enabled device. SD Card This option is available only when the memory card is present.
  • Page 66 8600 Series Mobile Computer Reference Manual LOAD PROGRAM VIA SD CARD Press the [Up]/[Down] keys to select a file. Then, press [ENTER] to view information of the program file. 1) If you have copied the desired program file(s) to your SD card, go to System Menu | 6.

  • Page 67: Doftp Menu

    Chapter 3 System Menu 3.7 DOFTP MENU This submenu is for the FTP client connection. It will log the mobile computer into an FTP server via Wi-Fi or Ethernet Cradle for the following tasks. Execute and/or update the script file “FTP.dat” Download the program update(s) Note: Go to System Menu and configure the network settings first.

  • Page 68: Local

    8600 Series Mobile Computer Reference Manual 3.7.1 LOCAL Depending on the script file “FTP.dat” saved on the mobile computer, you may update the script file or download any program update from FTP server, if necessary. SETTING Interface Options Supported Description Ethernet Cradle Seat the mobile computer in the Ethernet Cradle.

  • Page 69: Storage Menu

    Chapter 3 System Menu 3.8 STORAGE MENU This submenu is for using the mobile computer equipped with SD card as a removable disk, as well as for directly accessing files on SD card. Note: When SD card is present, the card icon will appear flashing while being accessed. If the mobile computer is preloaded with Batch AG runtime, it will automatically create two working directories “\AG\IMPORT”...
  • Page 70 Reference Manual Check Memory For an SD card that has never been used on 8600, a message like “Found New SD Card” will be displayed allowing users to scan the card for memory check. If the action is canceled then, memory check can still be performed here.

  • Page 71: Bluetooth Menu

    Chapter 3 System Menu 3.9 BLUETOOTH MENU This submenu is for the mobile computer, with built-in Bluetooth module, to work with other Bluetooth enabled devices. You must configure these parameters correctly. Bluetooth Settings Default Value HID, SPP Connect Setting Items Need to Be Checked Local Name Model no.

  • Page 72: Information

    8600 Series Mobile Computer Reference Manual 3.9.1 INFORMATION Information of network configuration can be viewed here. Bluetooth Menu | 1. Information Kernel version All user libraries reside in Kernel; no external libraries are required. MAC address of the Bluetooth module A name given to the mobile computer for identification By default, it is made up of model number and the serial number.

  • Page 73: Connect Setting

    Chapter 3 System Menu 3.9.2 CONNECT SETTING Set the connection parameters if necessary. Local Name Enter a name for identifying the mobile computer. By default, it is made up of model number and the serial number. Remote Name Leave it empty unless you want to make a specific connection. Broadcast Me Options —...

  • Page 74: Security

    8600 Series Mobile Computer Reference Manual 3.9.3 SECURITY Set or modify security parameters. Authentication Options — Enable or Disable PIN Code Define the encryption key values. Up to 16 characters, using ASCII code. Note: When authentication is enabled without providing a pre-set PIN code, the mobile...

  • Page 75: Echo Tests

    Chapter 3 System Menu 3.9.4 ECHO TESTS These echo tests are used for verifying connectivity to make sure the mobile computer is within coverage. Press [ESC] to stop and exit the test. SPP: Serial Port Profile It is used for ad hoc networking. DUN: Dial-Up Networking Profile DUN Modem - It makes use of a Bluetooth modem or mobile phone as a...
  • Page 76 8600 Series Mobile Computer Reference Manual SPP Master Set the mobile computer as a master device. 1. Pairing with your computer (slave) must be completed first. 2. Run the utility “EchoTest.exe” on your computer. Associated settings include - Select “RS-232” for interface.
  • Page 77 Chapter 3 System Menu DUN GPRS The mobile computer will try to connect to a mobile phone with GPRS functionality. 1. Pairing with your mobile phone must be completed first. Select “DialUp Network” for Target Machine options. 2. Run the utility “EchoTest.exe” on your computer. Associated settings include - Select “TCP/IP –...

  • Page 78: Pairing Test

    8600 Series Mobile Computer Reference Manual 3.9.5 PAIRING TEST The pairing procedure is for the creation and exchange of a link key between two Bluetooth-enabled devices. The devices use the link key for future authentication when exchanging information. 1) The mobile computer will start with making an inquiry so that the system can generate a list of device(s) that has been discovered nearby.

  • Page 79: Frequent Devices

    Chapter 3 System Menu 3.9.6 FREQUENT DEVICES Here is a list of devices that the mobile computer has been connected to lately. After each successful pairing, the system will update it. This list can show information of one device that provides any of the following services: Serial Port (SPP) Dial-Up Networking (DUN) Human Interface Device (HID)

  • Page 80: Wi-Fi Menu

    8600 Series Mobile Computer Reference Manual 3.10 WI-FI MENU This submenu accesses the settings of 802.11b/g/n wireless networking. You must configure these parameters correctly to be able to make the connection. Note: The menu is available only when the Wi-Fi module is present.

  • Page 81: Information

    Chapter 3 System Menu 3.10.1 INFORMATION Information of network configuration can be viewed here. Wi-Fi Menu | 1. Information Kernel version All user libraries reside in Kernel; no external libraries are required. Firmware version of the Wi-Fi module MAC address of the Wi-Fi module A name given to the mobile computer for identification.

  • Page 82: Network Setting

    8600 Series Mobile Computer Reference Manual 3.10.2 NETWORK SETTING Set parameters for IP networking. DHCP Options — Enable or Disable Subnet Mask Enter a new Mask IP, if necessary. Local IP Address Enter a new address for the mobile computer, if necessary.

  • Page 83: Wlan Setting

    Chapter 3 System Menu 3.10.3 WLAN SETTING Wireless networking can operate in two modes – (1) Ad-hoc mode: peer-to-peer, and (2) Infrastructure mode: point to multi-point through access points. Set the following parameters. Local Name Enter a name for identifying the mobile computer. By default, it is made up of model number and the serial number.
  • Page 84 8600 Series Mobile Computer Reference Manual Power Saving This refers to the low power consumption mode. Options — Enable or Disable The value you set must match that set for the access point. Ad-Hoc This refers to peer-to-peer mode, without going through access points.

  • Page 85: Security

    Chapter 3 System Menu 3.10.4 SECURITY Set or modify security parameters. WEP: Wired Equivalent Privacy EAP: Extensible Authentication Protocol WPA: Wi-Fi Protected Access Authentication Default authentication type [1] Open System This requires implementing WEP key. [0] Share Key WEP Menu Enable (For Share Key, it must be enabled!) WEP Setting Disable (default)

  • Page 86: Scan Devices

    8600 Series Mobile Computer Reference Manual WPA Passphrase Enter a phrase as your password (8 ~ 63 characters) 3.10.5 SCAN DEVICES Select this command to launch the scanning for the Wi-Fi hotspots within range. The mobile computer will first produce a scanning screen and then a result screen that displays all the WiFi hotspots discovered whether open or secured.

  • Page 87: Profile

    Chapter 3 System Menu 3.10.6 PROFILE This function allows users to create up to four Wi-Fi profiles. SSID Enter the SSID (up to 32 characters). Ad-Hoc This refers to peer-to-peer mode, without going through access points. Options — Enable or Disable Authentication [1] Open System Default authentication type...
  • Page 88 8600 Series Mobile Computer Reference Manual Enable WPA Setting Disable (default) Enable WPA2 Setting Disable (default) WPA Passphrase Enter a phrase as your password (8 ~ 63 characters)

  • Page 89: Echo Tests

    Chapter 3 System Menu 3.10.7 ECHO TESTS This function is used to measure the coverage of the range, estimate the number of APs and mobile computers needed, and determine the topology of deploying APs. Client Mode Set the mobile computer as a client. Enter the IP address of a server to which the mobile computer connects.
  • Page 90 Wait for a few seconds. The antenna icon, with gray bars, flashes to indicate 8600 is connecting to an access point under the same SSID. Once connected, the antenna icon will stop flashing. Next to the icon, the more white bars, the stronger the signal.
  • Page 91 Chapter 3 System Menu Once the connection of echo test is established, the details will be displayed as illustrated below. SNR (dB) RSS (-dBm) NF (-dBm) (Signal to Noise ratio) (Transmit Speed) (Received Signal (Noise Floor Level) Strength Level) 0 ~ 10 Very Poor Mbps 0 ~ 60...
  • Page 92 8600 Series Mobile Computer Reference Manual...

  • Page 93: Program Manager & Kernel

    Chapter 4 PROGRAM MANAGER & KERNEL This chapter explains Program Manager and Kernel that manage multiple programs and firmware upgrade. IN THIS CHAPTER 4.1 Program Manager ............81 4.2 Kernel ..............88 4.1 PROGRAM MANAGER The mobile computer supports multiple applications and languages. In the menu of Program Manager, it allows storing up to six programs and has one activated for the current use.

  • Page 94: Download Program

    8600 Series Mobile Computer Reference Manual 4.1.1 DOWNLOAD PROGRAM Here provides a list of programs currently stored on the mobile computer with size information. Multiple application programs can be downloaded through a variety of interfaces. Upon completion of downloading, you are allowed to input a name for the program.
  • Page 95 Chapter 4 Program Manager & Kernel SPARE MEMORY SECTORS (1 ~ 6) Additional program files can be directly downloaded to these sectors. Download a program file to an empty sector: 1. Press the [Up] and [Down] keys to select an empty sector, and then press [ENTER]. 2.

  • Page 96: Activate Program

    8600 Series Mobile Computer Reference Manual 4.1.2 ACTIVATE PROGRAM The list shows the entire spare programs stored on the mobile computer. From the list, you can select from the memory sector (1 ~ 6) or SD card. The selected program will be copied to the active memory sector and replace the current one.

  • Page 97: Upload Program

    Chapter 4 Program Manager & Kernel 4.1.3 UPLOAD PROGRAM You may duplicate one of the programs from the mobile computer to a host computer or another mobile computer. This can be used to clone software on mobile computers. The procedures are similar to that for downloading programs. If the target is “Terminal”, only the “RS232”...

  • Page 98: Download Font

    8600 Series Mobile Computer Reference Manual 4.1.4 DOWNLOAD FONT The terminal computer can be loaded with up to 6 font files. Users can input characters in fonts loaded on the device. 4.1.5 UPLOAD FONT You may duplicate one of the fonts from the mobile computer to a host computer or...

  • Page 99: Upload All

    Chapter 4 Program Manager & Kernel 4.1.6 UPLOAD ALL You may duplicate all of the programs/fonts from the mobile computer to another one or a host computer. Note: To clone all of the programs, the target mobile computer cannot have any other program downloaded except the active one;...

  • Page 100: Kernel

    8600 Series Mobile Computer Reference Manual 4.2 KERNEL The kernel resides in the innermost core of the system. It has the highest security and is always protected by the system. When the application program is corrupted and System Menu fails at the same time, Kernel Menu provides an access to fix the system.

  • Page 101: Kernel Information

    Chapter 4 Program Manager & Kernel 4.2.1 KERNEL INFORMATION Here provides important system information to help diagnose the system. Kernel Menu | 1. Information Hardware version Serial number of the mobile computer Manufacturing date Kernel version C library version BASIC Run-time version, if a BASIC application is downloaded Application program version 4-digit code for optional hardware configurations Refer to...

  • Page 102: Kernel Update

    8600 Series Mobile Computer Reference Manual 4.2.2 KERNEL UPDATE The kernel and bootloader might need to be updated to improve performance or due to other considerations. Refer to Appendix I Download Utility. The procedure of downloading a kernel (K8600.shx) or bootloader (BL8600.shx) update is like downloading a program.
  • Page 103 Chapter 4 Program Manager & Kernel Baud Rate Available baud rate options: 115200/57600/38400/19200/9600 bps KERNEL UPDATE VIA BLUETOOTH 1) Go to Kernel Menu | 4. System Menu | 8. Next Page | 2. Bluetooth Menu | 3. Security, and configure the following Bluetooth settings first. Authentication PIN code 2) Go to Kernel Menu | 2.

  • Page 104: Burn-In Test

    8600 Series Mobile Computer Reference Manual 2) Press the [Up] and [Down] keys to select a file. 3) Press [ENTER] to view information of the program file. 4) Press [ENTER] to confirm downloading the program file to the mobile computer.

  • Page 105: Specifications

    SPECIFICATIONS Model Designation 8600 8630 8660 Performance ARM Cortex-M3 Memory Program memory – 16 MB flash Data memory – onboard SRAM, options include 8 or 16 MB Expansion micro SD Slot with SDHC support Main Battery Rechargeable Li-ion battery – 3.7 V, 1100/2200 mAh...
  • Page 106 8600 Series Mobile Computer Reference Manual User Environment Operating Temperature -10 ~ 60 °C (14 ~ 140 °F) Storage Temperature -20 ~ 70 °C (-4 ~ 158 °F) Humidity (non-condensed) 10% to 90% (operating) / 5% to 95% (storage) Ingress Protection...

  • Page 107: Download Utility

    Appendix I DOWNLOAD UTILITY For easy development of applications, the mobile computer ships with FORGE Application Generator programs, batch and WLAN versions, as well as a download utility. FILE TYPES Depending on the file type, you may download a program or font file via System Menu, Program Manager or Kernel Menu.

  • Page 108: Basic Programs

    8600 Series Mobile Computer Reference Manual BASIC PROGRAMS First, download a BASIC runtime (e.g. B8600.SHX) via System Menu or Program Manager. Then, it will allow you to download a BASIC program (.SYN) via System Menu.

  • Page 109: Progload.exe

    Any BASIC program after BASIC Runtime has been installed first. .BIN file Any C program Use PC utility “SHX2Bin.exe” to convert the program (.SHX .BIN). Note: (1) For 8600, USB Virtual COM shares the interface option of RS-232/IrDA. (2) Cradle-IR is not supported on 8600.
  • Page 110 8600 Series Mobile Computer Reference Manual...

  • Page 111: Troubleshooting

    Try to re-charge the battery and monitor the charging status. Warning! Only use batteries or charging device manufactured by CipherLab. The use of wrong battery or charging device could result in damage to human body or the product itself, and will void your warranty.

  • Page 112: Keypad Seems Not Working

    8600 Series Mobile Computer Reference Manual KEYPAD SEEMS NOT WORKING Perform the keyboard test. (See 3.3.4 Keyboard.) If the problem persists, reload the battery pack and perform the test again. VIBRATOR SEEMS NOT WORKING Perform the vibrator test. (See 3.3.7 Vibrator.)

  • Page 113: Out Of Scanning Range

    Appendix II Troubleshooting OUT OF SCANNING RANGE Try adjusting the scanning distance from the scanner to the barcode. CANNOT TRANSMIT/RECEIVE DATA USING RS-232 CABLE Check if the RS-232 connection is correct and secured. Make sure the serial port parameters on the host are configured to match the serial parameters on the mobile computer.
  • Page 114 8600 Series Mobile Computer Reference Manual...

  • Page 115: Key Reference Table

    Appendix III Key Reference Table Appendix III KEY REFERENCE TABLE 29-KEY KEYPAD SYSTEM DEFAULTS Blue Blue Orange key Orange key pressed pressed pressed pressed once twice once twice BkSp BkSp PQRS pqrs WXYZ wxyz %#;, %#;,...

  • Page 116: Extended Function Keys

    8600 Series Mobile Computer Reference Manual EXTENDED FUNCTION KEYS Blue Blue Orange key Orange key pressed pressed pressed pressed once twice once twice PQRS pqrs WXYZ wxyz %#;, %#;, Extended Function Keys must be enabled through programming! BkSp BkSp...

  • Page 117: 39-Key Keypad

    Appendix III Key Reference Table 39-KEY KEYPAD SYSTEM DEFAULTS Blue Blue Orange key Orange key pressed pressed pressed pressed once twice once twice < > &...
  • Page 118 8600 Series Mobile Computer Reference Manual Blue Blue Orange key Orange key pressed pressed pressed pressed once twice once twice BKSP BkSp BkSP BkSp BkSp...

This manual is also suitable for:

86608630

Table of Contents