Chapter Iii Repair And Maintenance Of Vehicle Body; Section 1 Rear Driving Gearcase And Driving Shaft; (I)Disassembly - ATV ATV110-M Service Manual

Chapter III Repair and Maintenance of Vehicle body

Section 1 Front wheel and Front Brake
Ser No.
1 Tire specification
Rim dimension
2
Tire air pressure(normal
3
temperature)
4
Run-out
5
Tire wear limit value
6
Wear limit value of friction wafer
Wear limit value of front brake hub
7
¢Ù
-46-
Technical Parameter
Item
Standard value
Min value
Max value
Radia run-out
End face run-act

(I)Disassembly

1)Pay attention to following points when dis-
assembling front wheels
a:Place the vehicle on a horizontal ground, and
press down the rear brake attaching clamp¢Ù.
b.Loosen the connecting nut¢Ùof front &rear
wheel on the front wheel.
c:Place a bracket under the frame to pick up
the front wheels.
Warning
Support the vehicle firmly and avoid dropping
down.
2)Disassemble the connecting nut ¢Ùof front
&rear wheel.
Parameter
AT22¡Á7-10
5.5¡Á10
20KPa(Standard value)
17KPa(Min vlaue)
23KPa(Max value)
2mm
2mm
2mm
2mm
16mm