ATV ATV110-M Service Manual page 51

6.Inspection
One of parts of O-ring¢Ù , compressure spring
,rough filter ¢Û ,fine filter ¢Üis damaged,
repalce it.
7.Cleaning
Clean the compressure spring¢Ú , filter¢Û ,filter
¢Ü , filter plug of crankcase¢Ýand filter net cap
with cleaner.
8.Coat the engine oil on the O-ring slightly.
9.Install the fire filter¢Ù , fire filter cap with O-
ring ¢Úrough filter ¢Ûand draining plug ¢Ü.
Warning
Before installing the draining plug, mount O-
ring ¢Ý,compress spring ¢Þand fine filter and
be ensure that their mounting order must be
correct.
Mounting torque :fine filter cap:10N.m
draining plug:40N.m
10.Fill machine oil into crankcase
Refer to : "Inspection of Engine oil Quantity"
Appendix:Total:2.2L
Periodic changing oil :1.8L
Oil quantity when cleaning or replacing filter
net: 1.7L
11. Mount dipstick
12. Pre-heat engine for 5 minutes or more, and
then stop
13. Check the oil flow
-45-