(Ii)Removal Steps Of Steering Vertical Column Welding - ATV ATV110-M Service Manual

(II)Removal steps of steering vertical column
welding
1.Plain move
¢ÙThe locking part of locking pad as shown
2.Removal
¢ÚBolt
¢ÛLocking washer
¢ÜClip assy
3.Remocal
Install the steering vertical column with split
pin
Nut
Washer
4.Removal
Split pin
Nut
Tension rod ¢Ù
Caution
When removing the tension rod end and steer-
ing ball pin from the steering vertical column
welding assy and front seat assy of front brake
with common bearing tension tool and other
tools, pay attention to not damage the relavent
parts.
5.Removal
Remove the steering vertical column welding
assy together with steering vertical column
holder.
6.Removal
¢ÙSteering vertical column holder
¢ÚBushing
¢ÛOil seal
-58-